0283-07 Intake Valve Actuation Oil Pressure not responding (91)
产生此代码的情况:
发动机控制模块 (ECM) 检测到以下情况:
- 进气门驱动压力电磁阀循环了 10 次,但进气门驱动压力没有变化。
- ECM 至少已通电两秒钟。
系统响应:
ECM 将记录诊断代码并触发快照。
无
测试步骤 1. 进行以下的诊断步骤: 进气门执行器响应 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
2003/07/01 Quality of Remanufactured Camshafts {1210}
C7 On-highway Engine Electronic Control Module - Remove and Install
C7 On-highway Engine Cylinder Head - Install
C7 On-highway Engine Cylinder Head - Remove
C7 On-highway Engine Turbocharger - Install
C7 Engines for Combat and Tactical Vehicles Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Turbocharger - Remove
C15 and C18 Petroleum Generator Sets Parallel Operation
3512C HD SR500 Generator Sets Single Unit Operation
120H and 135H Motor Graders Machine Systems Metering Pump (Steering) - Remove and Install
2003/07/01 Identifying the Prelube Circuit and the Air Start Circuit {1408}
2003/10/01 Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
C11 and C13 Engines Electronic Unit Injector - Remove
C11 and C13 Engines Electronic Unit Injector - Install
C11 and C13 Engines Rocker Shaft and Pushrod - Remove
C11 and C13 Engines Rocker Shaft and Pushrod - Install
C11 and C13 Engines Fuel Filter Base - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C4.4 (Mech) Industrial Engine Electrical System
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
C7 On-highway Engines Turbocharger - Inspect