Piston Cooling Jets - Remove and Install
Show/hide table
| 需要的工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 9S-9082 | 发动机盘车工具 | 1 |
开始:
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
|
特别小心不要使活塞冷却喷嘴弯曲，因为活塞冷却喷嘴是精确对准活塞冷却液通道的。 每个冷却喷嘴仅有一个位置。 活塞在下止点时，活塞底部的挡圈使活塞冷却喷嘴有间隙。 |
- 使用工具 (A)，转动曲轴，以便可以接近活塞冷却喷嘴。
- 拆卸螺栓 (1) 和活塞冷却喷嘴 (2)。
Show/hide table
| |
| 图 1 | g01004705 |
Show/hide table
| 需要的工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 9S-9082 | 发动机盘车工具 | 1 |
Show/hide table
| 注意 |
|---|
|
特别小心不要使活塞冷却喷嘴弯曲，因为活塞冷却喷嘴是精确对准活塞冷却液通道的。 每个冷却喷嘴仅有一个位置。 活塞在下止点时，活塞底部的挡圈使活塞冷却喷嘴有间隙。 |
- 使用工具 (A)，转动曲轴，以便可以接近活塞冷却喷嘴。
- 将活塞冷却喷嘴 (2) 放置在缸体中。 安装螺栓 (1)。 拧紧螺栓至扭矩为
40 ± 8 N·m (30 ± 6 lb ft) 。
Show/hide table
|
| |
| 图 2 | g01004705 |
结束:
- 安装发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 安装"。
Caterpillar Information System:
C7 Engines for Combat and Tactical Vehicles 0105-11 Very High Intake Manifold Air Temperature (64)
C7 Engines for Combat and Tactical Vehicles 0190-00 Engine Overspeed Warning (35)
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Rotor Position Sensor - Calibrate
C7 Engines for Combat and Tactical Vehicles 0100-11 Very Low Oil Pressure (46)
C7 Engines for Combat and Tactical Vehicles 0110-11 Very High Coolant Temperature (61)
3406C Marine Auxiliary Generator Set Safety Messages
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Vibration Sensors Zeroes - Calibrate
C7 Engines for Combat and Tactical Vehicles Timer Parameters
C7 Engines for Combat and Tactical Vehicles Smart Idle Parameters
C7 Engines for Combat and Tactical Vehicles Cruise Control Parameters
Installation of the 249-2439 Seal {1371} Installation of the 249-2439 Seal {1371}
2003/07/01 An Improved Spin-On Oil Filter Is Now Available {1306, 1308}
C7 Engines for Combat and Tactical Vehicles 0111-11 Very Low Coolant Level (62)
C7 Engines for Combat and Tactical Vehicles 0110-00 High Coolant Temperature Warning (61)
3406E Engine Atmospheric Pressure Sensor - Remove and Install
C7 Engines for Combat and Tactical Vehicles 0102-07 Boost Pressure not responding
C7 Engines for Combat and Tactical Vehicles 0032-05 Turbo Wastegate Solenoid current low
C7 Engines for Combat and Tactical Vehicles 0032-06 Turbo Wastegate Solenoid current high
C7 Engines for Combat and Tactical Vehicles 0032-11 Turbo Wastegate Solenoid current mismatch
C7 On-highway Engine Unit Injector Hydraulic Pump
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Re-refined Base Stock Oils
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Wellhead Gas
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Fuel Effects on Maintenance Costs
C7 Engines for Combat and Tactical Vehicles 0164-00 Excessive Injection Actuation Pressure (17)