C7 Engines for Combat and Tactical Vehicles Caterpillar


Smart Idle Parameters

Usage:

C7 FML

"Battery Monitor & Engine Control Voltage"

This parameter sets a voltage trip point. When the voltage falls below the trip point the ECM will automatically elevate the engine speed to the rpm that is specified in the "Battery Monitor & Low Idle Engine Speed" parameter.

Table 1
Minimum     Maximum     Default    
0 Volts     25.5 Volts     0 Volts    

"Battery Monitor Low Idle Engine Speed"

This parameter sets the engine speed if the battery voltage falls below the trip point that is specified in the "Battery Monitor & Engine Control Voltage" parameter.

Table 2
Minimum     Maximum     Default    
700 rpm     TEL     1000 rpm    

Caterpillar Information System:

C7 Engines for Combat and Tactical Vehicles Cruise Control Parameters
Installation of the 249-2439 Seal {1371} Installation of the 249-2439 Seal {1371}
2003/07/01 An Improved Spin-On Oil Filter Is Now Available {1306, 1308}
C3.3 Industrial Engine Engine - Clean
3508C, 3512C and 3516C Marine Engines Camshaft Bearings - Install
Replacing the Convection Jacket Water Heaters with a Recirculating Jacket Water Heater on 3500 Engines{1383} Replacing the Convection Jacket Water Heaters with a Recirculating Jacket Water Heater on 3500 Engines{1383}
3508C, 3512C and 3516C Marine Engines Camshaft Bearings - Remove
G3520C and G3520E Generator Set Engines Cylinder Liner - Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Telemetry - Calibrate
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Bypass Valve - Remove and Install
G3500 Engines MID 018 - CID 0552 - FMI 11 Engine Speed present during an O2 calibration
G3500 Engines MID 018 - CID 0551 - FMI 01 Oxygen Sensor not connected to buffer
C7 Engines for Combat and Tactical Vehicles Timer Parameters
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Vibration Sensors Zeroes - Calibrate
3406C Marine Auxiliary Generator Set Safety Messages
C7 Engines for Combat and Tactical Vehicles 0110-11 Very High Coolant Temperature (61)
C7 Engines for Combat and Tactical Vehicles 0100-11 Very Low Oil Pressure (46)
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Rotor Position Sensor - Calibrate
C7 Engines for Combat and Tactical Vehicles 0190-00 Engine Overspeed Warning (35)
C7 Engines for Combat and Tactical Vehicles 0105-11 Very High Intake Manifold Air Temperature (64)
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C7 Engines for Combat and Tactical Vehicles 0111-11 Very Low Coolant Level (62)
C7 Engines for Combat and Tactical Vehicles 0110-00 High Coolant Temperature Warning (61)
3406E Engine Atmospheric Pressure Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.