2003/06/09 Caterpillar

Correction to Specifications , "Pump Mounting (Hydroststic)" {3203}

Usage:

IT14G 1WN

Integrated Toolcarrier: IT14G (S/N: 8ZM1-UP; 1WN1-UP)
Wheel Loader: 914G (S/N: 7ZM1-UP; 9WM1-UP)

Specifications, RENR2812, "IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train", "Pump Mounting (Hydrostatic)". This module is part of Service Manual, SENR6760.Specifications, SENR6765, "IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train", "Pump Mounting (Hydrostatic)". This module is part of Service Manual, SENR6760.

The dimension for callout (5) is incorrect. Replace the current callout (5) with the following callout (5) .

(5) Dimension between the hub and the pump face ... 68.5 ± 1.0 mm (2.70 ± 0.04 inch)

Caterpillar Information System:

TH350B, TH355B, TH360B and TH460B Telehandlers Work Tool - Inspect/Replace

TH350B, TH355B, TH360B and TH460B Telehandlers Engine Air Filter Secondary Element - Replace

3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install

TH350B, TH355B, TH360B and TH460B Telehandlers Boom Head Section - Lubricate

TH350B, TH355B, TH360B and TH460B Telehandlers Belt - Inspect/Replace

834H Wheel Dozer and 836H Landfill Compactor Operator Controls - Electrohydraulic Control Console

TH220B, TH330B and TH340B Telehandlers Cab Door

2003/11/01 Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}

2003/11/10 Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}

C-9 Engine for the 973C Track-Type Loader Diagnostic Codes

784C and 785C Off-Highway Truck Power Train Torque Converter - Disassemble

834H Wheel Dozer and 836H Landfill Compactor Operator Controls - Overhead Switch Panels

C-9 Engine for the 973C Track-Type Loader Cat Data Link Circuit - Test

924G and 924GZ Wheel Loaders Machine Systems Secondary Steering Pump and Electric Motor - Remove and Install

561N Pipelayer Capacities (Refill)

836G Landfill Compactor and 834G Wheel Dozer Power Guard Control

988H Wheel Loader Fuel System - Prime

3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft - Remove

2004/04/26 New Pin for the Hinge on the Off-Highway Truck Body Improves Service Life {7258}

C-9 Engine for the 973C Track-Type Loader CID 0444 FMI 03 Start Relay short to +batt

C27 and C32 Generator Set Engines CID 0444 FMI 05 Start Relay open circuit

C27 and C32 Generator Set Engines CID 0444 FMI 06 Start Relay short to ground

3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft - Install

988H Wheel Loader Fuel System Primary Filter (Water Separator) Element - Replace