Accessory Drive - Remove and Install
Start By:
- Remove the auxiliary pump. Refer to Disassembly and Assembly, "Auxiliary Pump - Remove" for the engine that is being serviced.
- Remove bolts (1) and remove accessory drive (2) from the front plate of the housing.
Show/hide table
Illustration 1 | g00995770 |
- Apply clean engine oil on O-ring seal (3) and the bore of the front plate of the housing.
- Install accessory drive (2) on the front plate of the housing.
Show/hide table
Illustration 2 | g00995683 |
End By:
- Install the auxiliary pump. Refer to Disassembly and Assembly, "Auxiliary Pump - Install" for the engine that is being serviced.
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Water Pump - Install
G3520C and G3520E Generator Set Engines Water Pump - Remove
3500B and 3500C Marine Propulsion Engines System Overview
C4.4 (Mech) Industrial Engine Glow Plugs - Test
2003/05/05 New QuickEvac High Speed Oil Change Arrangements Are Available {1325}
3116 and 3126 Truck Engines Rocker Shaft and Pushrod - Install
3116 and 3126 Truck Engines Rocker Shaft - Assemble
2003/05/12 New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
G3520B Industrial Engine PWM Sensor
3116 and 3126 Truck Engines Rocker Shaft - Disassemble
3500 Marine Engines Accumulator Pressure - Test
3500B and 3500C Marine Propulsion Engines Electronic Display Module
3054E Industrial Engine Fuel Injection Lines - Remove and Install
3618 Engine Aftercooler Core - Clean/Test
C1.5 and C2.2 Generator Generator Operation
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202} Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
G3520B Industrial Engine Electrical Power Supply
3054E Industrial Engine Fuel Injection Nozzles - Remove
3054E Industrial Engine Fuel Injection Nozzles - Install
G3304 and G3306 Engines Service Meter - Remove and Install
3618 Engine Turbocharger - Inspect
G3304 and G3306 Engines Accessory Drive - Disassemble
G3304 and G3306 Engines Accessory Drive - Assemble
G3304 and G3306 Engines Magneto - Remove and Install