Throttle Control Valve - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连杆支架     | 4     |
B     | 4C-5599     | 防粘结剂     | 1     |
- 将工具 (A) 和适当的起吊设备连接到油门 (8) 上。
Show/hide table
图 1 | g00993898 |
- 定位油门 (8) 和密封垫。 油门的重要约为 54 kg (120 lb)。
- 安装螺栓 (11) 。
- 将支架 (9) 置于油门 (8) 上。
Show/hide table
图 2 | g00993897 |
- 安装螺栓 (7) 。
- 连接线束组件 (10) 。
- 将工具 (A) 和适当的起吊设备连接到管组件 (1) 上。
Show/hide table
图 3 | g00993896 |
- 定位管组件 (1) 和密封垫。 管组件的重量约为 18 kg (40 lb)。
- 将工具 (B) 涂抹在螺栓 (6) 上。
- 安装螺栓 (6) 。 拧紧螺栓 (6) 至扭矩为 240 ± 40 N·m (180± 30 lb ft)。
- 将支架 (5) 置于管组件 (1) 上。
Show/hide table
图 4 | g00993894 |
- 将工具 (B) 涂抹在螺栓 (4) 上。
- 安装螺栓 (4) 。 拧紧螺栓 (4) 至扭矩为 60 ± 12 N·m (44 ± 9 lb ft)。
- 定位 O 形密封圈。 使用螺栓 (3) 将弯头 (2) 连接到管组件 (1) 上。
Show/hide table
图 5 | g00993893 |
- 接通气体供给。
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
3456 Generator Sets Generator Description
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
3054E Industrial Engine Fuel Injection Pump - Remove
C3.3 and C4.4 Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
C4.4 Industrial Engine Engine Oil Level - Check
3044C Industrial Engine and Engines for Caterpillar Built Machines Main Bearing Journal
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
G3304 and G3306 Engines Turbocharger - Assemble
Installation Guide for Industrial Electronic Engine Displays Messenger - Test
3054E Industrial Engine Alternator - Install
2012/10/01 Procedure for Disassembly and Assembly of the Pressure Relief Valve in Certain C32, G3500, 3500. 3600, and C280 Engines {5117}
3456 Generator Sets Generator Identification
3500B and 3500C Marine Propulsion Engines Engine Monitoring System
3500B Engines for Caterpillar Built Power Modules Thermostatic Valve
3456 Generator Sets Generator Installation
C1.5 and C2.2 Generator Set Engines Fuel Injection Lines - Remove and Install
C1.5 and C2.2 Generator Set Engines Fuel Injection Pump - Install
3406C Generator Sets Sensors and Electrical Components
C1.5 and C2.2 Marine Generator Set Engines Flywheel Housing - Remove and Install
3500B and 3500C Marine Propulsion Engines System Configuration Parameters
Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
C1.5 and C2.2 Marine Generator Set Engines Crankshaft Pulley - Remove and Install
C1.5 and C2.2 Marine Generator Set Engines Valve Mechanism Cover - Remove and Install