Unit Injector Sleeve - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 372-7975     | 喷油器套筒工具     | 1     |
B     | -     | 测压口 (1/4 - 28 x 15 cm (6 in)) (1)     |
2     |
C     | 8S-4716     | 螺栓 (1/4 - 28)     | 2     |
D     | 1U-7600     | 滑锤拉拔器总成     | 1     |
Show/hide table
( 1 ) | 从 McMaster-Carr 2589A26 采购。 |
开始:
- 拆下单体喷油器。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 有关正确的排放步骤,请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
- 在单体喷油器套管底部定位工具 (A) 。
Show/hide table
图 1 | g03500197 |
- 安装工具 (B) 。 使用工具 (B) 切割进入单体喷油器套管侧的螺纹。 对于另一侧,重复相同的步骤。
Show/hide table
图 2 | g03500360 |
- 安装工具 (C) 。
Show/hide table
图 3 | g03500367 |
- 将工具 (D) 旋入工具 (A) 的顶部。 使用工具 (D) 拆卸单体喷油器套管。
Show/hide table
图 4 | g03500380 |
Caterpillar Information System:
3500B and 3500C Marine Propulsion Engines Emergency Stop Switch
3500B and 3500C Marine Propulsion Engines Electrical Power Supply
3500B and 3500C Marine Propulsion Engines Digital Sensor Supply
3500B and 3500C Marine Propulsion Engines CAN Data Link
3500B and 3500C Marine Propulsion Engines Cat Data Link
3500B and 3500C Marine Propulsion Engines Analog Sensor Supply
3500B and 3500C Marine Propulsion Engines Air Shutoff System
C7 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
G3304 and G3306 Engines Engine Support - Remove and Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3500B and 3500C Marine Propulsion Engines Engine Control Switch (ECS)
3500B and 3500C Marine Propulsion Engines Engine Speed/Timing Sensor
3500B and 3500C Marine Propulsion Engines Injector Solenoids
3500B Series II Marine Engines Prelubrication System
3500B and 3500C Marine Propulsion Engines Starting Motor System
3500B and 3500C Marine Propulsion Engines Secondary ECM/Personality Module
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
3500B and 3500C Marine Propulsion Engines Engine Speed/Timing Sensor - Calibrate
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Alternator and Regulator
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
G3304 and G3306 Engines Camshaft - Remove
Cold Weather Recommendations for On-Highway Diesel Truck Engines Fuel System Information