Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
- Wheel Loaders:
- 988F Series II (S/N: 2ZR1-UP)
- 988F (S/N: 8YG1-UP)
A portion of the existing information is incorrect. Replace step 74 with the following information. The remainder of the information is correct.
- Use a hoist and suitable lifting chains to install the manifold assembly in position on the No. 4 clutch housing. The notch that is located in the bearing must align with the dowel in the shaft assembly. Remove the lifting eyes and install two bolts in place of the lifting eyes.
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
963C Track-Type Loader Hydraulic System Tilt Cylinder
963C Track-Type Loader Hydraulic System Lift Cylinder
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000} Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
D6N Track-Type Tractor Power Train Track Roller Frame - Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
963C Track-Type Loader Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
613C Series II Wheel Tractor-Scraper Hydraulic System Vane Motor (Elevator)
2003/03/31 Correction to the Disassembly and Assembly , "Transmission Hydraulic Control Valve - Disassemble" {3073, 3167}