2003/03/31 Caterpillar


Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}

Usage:

988F II 2ZR
Wheel Loaders:
988F Series II (S/N: 2ZR1-UP)
988F (S/N: 8YG1-UP)
Disassembly and Assembly, SENR5729, "988F Wheel Loader and 988F Series II Wheel Loader", "Transmission Planetary - Disassemble". This module is part of Service Manual, SENR5720 for the 988F Wheel Loader and Service Manual, SENR1355 for the 988F Series II Wheel Loader.

A portion of the existing information is incomplete. Replace step 19 and step 26 with the following information. The remainder of the information is correct.

  1. Remove two of the bolts in manifold assembly (31) and then install two 1/2 - 13 NC forged eyebolts in manifold assembly (31). Use suitable lifting chains and a hoist to remove manifold assembly (31). The weight of the manifold assembly is 73 kg (160 lb).

  1. Remove six dowel pins. Remove springs (39). Remove two friction discs (40) and one clutch plate (41) .

Caterpillar Information System:

C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
963C Track-Type Loader Hydraulic System Tilt Cylinder
963C Track-Type Loader Hydraulic System Lift Cylinder
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000} Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
D6N Track-Type Tractor Power Train Track Roller Frame - Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train Pivot Bar-Remove and Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
963C Track-Type Loader Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.