3054E Industrial Engine Caterpillar


Engine Oil Cooler - Remove

Usage:

3054E 304

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。

按照当地法规和指令处置所有液体。


  1. 将发动机机油冷却器中的冷却液排放到适当的容器内。 将发动机机油冷却器中的发动机机油排放到适当的容器内。 有关排放发动机冷却液和发动机机油的步骤,请参阅操作和保养手册。

    注: 有关发动机冷却液容量和发动机机油容量的信息,请参阅操作和保养手册, "加注容量"。




    图 1g00952614

  1. 拆下调整螺钉 (6) 。 拆下调整螺钉 (4) 。

    注: 此时请勿拆下调整螺钉 (7) 。

  1. 从缸体上拆下发动机机油冷却器的壳体 (3) 。

  1. 拆下调整螺钉 (7) 。 从发动机机油冷却器的壳体 (3) 上拆下发动机机油冷却器 (2) 和密封件 (5) 。 废弃密封件 (5) 。

  1. 从发动机机油冷却器和缸体的壳体上拆下密封垫 (1) 。 废弃密封垫 (1) 。

Caterpillar Information System:

3054E Industrial Engine Engine Oil Filter Base - Remove and Install
C11 and C13 On-Highway Engines Belt Tensioner
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 1) Circuit - Test
C1.5 and C2.2 Generator Sets Voltage Regulators
2003/02/03 Special Instruction, REHS1238, "Obtaining Factory Passwords and Software Enabled Attachments" is Available {7610}
3054E Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
3054E Industrial Engine Piston Cooling Jets - Remove and Install
320B, 320B L and 320B N Excavators Swing Drive Oil Sample - Obtain
C13 and C15 Engines for Combat and Tactical Vehicles Remote PTO Accelerator Position Sensor Circuit - Test
3054E Industrial Engine Crankshaft Front Seal - Install
3054E Industrial Engine Crankshaft Front Seal - Remove
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
3054E Industrial Engine Engine Oil Cooler - Install
C13, C15, and C18 Tier 4 Final Engines Water Pump
3054E Industrial Engine Water Pump - Remove and Install
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Tachometer Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Two Speed Axle Switch Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed and Speedometer Circuit - Test
C11, C13 and C15 On-highway Engines System Overview
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Disassemble - Type 1
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Assemble - Type 1
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Increased Engine Oil Temperature - Inspect
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Cooling System - Check - Overheating
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.