2003/02/01 Caterpillar


Revised Replacement Criteria for Camshafts {1210}

Usage:

3406E 1LW
Truck Engines:
3406E (S/N: 5DS1-UP; 5EK1-55087 and 55088-UP; 1LW1-UP; 1MM1-UP; 6TS1-UP; 2WS1-UP)
C-15 (S/N: 6NZ1-UP)
C-16 (S/N: 7CZ1-UP)

Caterpillar has reviewed the replacement criteria in the Special Instruction, REHS0489-01, "Replacement Criteria for Camshafts in 3406E, C-15, and C-16 Truck Engines" for determining when the engine camshaft needs to be replaced. This current instruction was specifically written in order to address metallurgical concerns with early (S/N: 5EK1-55087) engines. These problems are described in Service Letter PS5444. The Special Instruction, REHS0489-01 provides a flow chart and illustrations in order to determine if replacement of the camshaft is needed. Caterpillar is issuing new replacement criteria, flow charts, and illustrations for replacing camshafts in engines that are built after (S/N: 5EK55087).

The Special Instruction, REHS0489-01 is being purged and replaced. This information will now be included in the new Special Instruction, REHS1572-00. This instruction also includes new replacement criteria for the above listed engines. Some pitting and scratches on the camshaft lobes are now allowed in the new replacement criteria. Please see the new Special Instruction, REHS1572-00 for the flow chart and photos of the new criteria.

Caterpillar Information System:

C13 Engine for Combat and Tactical Vehicles Fuel System - Prime
320D and 323D Excavators Machine System Specifications Sprocket
Conversion of Ignition Systems for G398 Engines{1550, 1552} Conversion of Ignition Systems for G398 Engines{1550, 1552}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Software Installation
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
2012/03/09 Maintenance Intervals for Valve Bridge and Valve Lash Adjustment of 3500 and C175 Machine Engines {1102}
2003/01/01 New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections
G3500B Engines Cylinder Head Valves
Conversion of Ignition Systems for G399 Engines{1550, 1552} Conversion of Ignition Systems for G399 Engines{1550, 1552}
Conversion of Ignition Systems for G379 Engines{1550, 1552} Conversion of Ignition Systems for G379 Engines{1550, 1552}
2003/04/01 New Part Numbers for Turbochargers Have Been Introduced {1052}
C11, C13 and C15 On-highway Engines 0105-00 High Intake Manifold Air Temperature Warning (64)
C11, C13 and C15 On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Wireway
C11, C13 and C15 On-highway Engines 0064-08 Secondary Engine Speed loss of signal (34)
C11, C13 and C15 On-highway Engines 0190-08 Primary Engine Speed Loss of Signal (34)
3126B Marine Engines Coolant Level Sensor Circuit - Test
3406E, C12, C15 and C18 Marine Engines Indicator Lamp Circuit - Test
C11, C13 and C15 On-highway Engines 0084-00 Vehicle Overspeed Warning (41)
C1.5 and C2.2 Generator Sets Starting the Engine
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Fuel Transfer Pump
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets General Information
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0084-01 Vehicle Speed loss of signal (31)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.