Crankshaft Wear Sleeve (Rear) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 242-9955     | 拉拔器     | 1     |
- | 隔套     | 1     |
开始:
- 拆下曲轴后密封。 有关正确的步骤,请参阅拆解和装配, "曲轴后油封 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 承磨衬套用于矫正磨损或损坏的密封面。 承磨衬套不是原装设备。 承磨衬套随附有内径大于标准值的曲轴后油封。 如果安装承磨衬套,不能使用标准曲轴后油封。
- 使用工具 (A) 将曲轴承磨衬套 (1) 从曲轴 (2) 上拆下。
Show/hide table
图 1 | g02815577 |
典型实例 |
Caterpillar Information System:
C11, C13 and C15 On-highway Engines Replacing the ECM
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Neutral Switch Circuit - Test
2003/01/20 New Part Numbers for Turbochargers Have Been Introduced for 3054 Machine Engines {1052}
C11, C13 and C15 On-highway Engines PTO Shutdown Timer - Test
C1.5 and C2.2 Generator Sets Safety Messages
2003/03/10 New Cat QuickEvacTM High Speed Oil Change Arrangements Are Available {1302, 1372}
2002/12/23 A Replacement Filter Is Incorrectly Identified {5050, 5068}
3500B Locomotive Engines Air Shutoff
C9 Urban Transit Bus Engine Engine Crankcase Pressure (Blowby) - Test
C9 Urban Transit Bus Engine Aftercooler - Test
C9 Urban Transit Bus Engine Inlet Manifold Pressure - Test
C9 Urban Transit Bus Engine Fuel System Pressure - Test
3054E Industrial Engine Crankshaft Wear Sleeve (Rear) - Install
2003/04/01 New Part Numbers for Turbochargers Have Been Introduced {1052}
Conversion of Ignition Systems for G379 Engines{1550, 1552} Conversion of Ignition Systems for G379 Engines{1550, 1552}
Conversion of Ignition Systems for G399 Engines{1550, 1552} Conversion of Ignition Systems for G399 Engines{1550, 1552}
G3500B Engines Cylinder Head Valves
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections
2003/01/01 New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2012/03/09 Maintenance Intervals for Valve Bridge and Valve Lash Adjustment of 3500 and C175 Machine Engines {1102}
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Software Installation
Conversion of Ignition Systems for G398 Engines{1550, 1552} Conversion of Ignition Systems for G398 Engines{1550, 1552}
320D and 323D Excavators Machine System Specifications Sprocket