Engine Oil Level Switch
Show/hide table
Illustration 1 | g01156943 |
(1) Final installation torque for the liquid level switch ... 20 ± 4 N·m (15 ± 3 lb ft)
Operating temperature range ... -40 to 125 °C (-40 to 257 °F)
Note: The level switch must be on the level surface and the engine is not running in order to detect the level properly. The output signal of the switch must have three consecutive low levels before the low oil condition is signalled.
Contact position
When the float is up the switch is closed.
When the float is down the switch is open.
Caterpillar Information System:
3056E Industrial Engine Engine Oil Relief Valve - Remove and Install
C15 Petroleum Generator Set Engines Cylinder Head Valves
C7 Engines for Combat and Tactical Vehicles Engine Cranks but Will Not Start
C11, C13 and C15 On-highway Engines System Configuration Parameters
C11, C13 and C15 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
G3406 and G3412 Generator Set Engines Gas Pressure Regulator
C11, C13 and C15 On-highway Engines Customer Specified Parameters Worksheet
G3406 and G3412 Generator Set Engines Gas Pressure Regulator
G3406 and G3412 Generator Set Engines Gas Pressure Regulator
C11, C13 and C15 On-highway Engines Customer Specified Parameters Table
C7 and C9 On-Highway Engines Engine Monitoring Parameters
C15 Petroleum Generator Set Engines Electronic Unit Injector Wiring
C11 and C13 On-Highway Engines Engine Design
C-18 Truck Engines Safety Messages
C11 and C13 Petroleum Engines Overhaul Considerations
C11 and C13 On-Highway Engines General Information
C7 and C9 On-Highway Engines Customer Specified Parameters Worksheet
C7 and C9 On-Highway Engines Output Selections
3056E Industrial Engine Engine Oil Pump - Remove
3056E Industrial Engine Engine Oil Pump - Install
C7 and C9 On-Highway Engines Cruise Control Parameters
C15 Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 On-Highway Engines Engine Design
C11, C13 and C15 On-highway Engines Powertrain Data Link Circuit - Test