3516B Engine for Caterpillar Built Machines Caterpillar


MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration

Usage:

994D 3TZ
Conditions Which Generate This Code:

The Electronic Control Module (ECM) records one of the following conditions. The Oil Pressure Sensor never calibrated. The oil pressure is greater than ± 27 kPa (4 psi) from the atmospheric pressure. The ECM reads oil pressure less than 35 kPa (5 psi). The oil pressure is greater than 130 kPa (19 psi). The oil pressure changes more than 25 kPa (3.6 psi) during a calibration attempt. The diagnostic codes 274-03 or 274-04 are active.

System Response:

The CID-FMI may be viewed on a display module or the Caterpillar Electronic Technician (ET). The diagnostic codes are active. The diagnostic codes are not logged in memory.

Test Step 1. Perform the following test: Analog Sensor - Calibrate

Results:

  • OK - Stop.

  • REPAIRED, OK - Stop.

Caterpillar Information System:

3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
D11R Track-Type Tractor Model Specific Coolant Information
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
3054E Industrial Engine Flywheel - Remove
631G and 637G Wheel Tractor-Scrapers Hydraulic System Bail Cylinder
D10R Track-Type Tractor Safety Messages
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
C-9 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System System Schematic
D10R Track-Type Tractor Refrigerant Dryer - Replace
C-9 Engine for Caterpillar Built Machines System Configuration Parameters
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.