MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
Conditions Which Generate This Code:
The Electronic Control Module (ECM) reads signal voltage that is greater than 4.8 VDC for one second. The ECM has been powered for three seconds. The diagnostic codes 262-03 and 262-04 are not active.
System Response:
The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the Caterpillar Electronic Technician (ET). The ECM flags oil pressure as invalid data and a default value of 500 kPa (73 psi) is used.
Test Step 1. Perform the following diagnostic procedure: Engine Sensor Open/Short Test
Results:
- OK - STOP
- REPAIRED, OK - STOP
Caterpillar Information System:
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
D11R Track-Type Tractor Model Specific Coolant Information
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
3054E Industrial Engine Flywheel - Remove
631G and 637G Wheel Tractor-Scrapers Hydraulic System Bail Cylinder
D10R Track-Type Tractor Safety Messages
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
C15 Petroleum Generator Set Engines Electric Starting Motor
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
C-9 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System System Schematic