3516B Engine for Caterpillar Built Machines Caterpillar


MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled

Usage:

994D 3TZ
Conditions Which Generate This Code:

The Electronic Control Module (ECM) reads a negative differential pressure between the unfiltered engine oil pressure sensor and the filtered engine oil pressure sensor. The sensors may be installed incorrectly. The diagnostic codes for the analog sensor power supply 262-03 and 262-04 are not "ACTIVE".

System Response:

The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the Caterpillar Electronic Technician (ET). The ECM flags the unfiltered engine oil pressure as invalid data. The engine monitoring system is disabled for filtered engine oil pressure.

Test Step 1.

Correctly install the sensor.

Results:

  • REPAIRED, OK - Stop.

Caterpillar Information System:

D11R Track-Type Tractor Model Specific Coolant Information
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
3054E Industrial Engine Flywheel - Remove
631G and 637G Wheel Tractor-Scrapers Hydraulic System Bail Cylinder
D10R Track-Type Tractor Safety Messages
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
C15 Petroleum Generator Set Engines Electric Starting Motor
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
C-9 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.