Electronic Control Module (ECM) - Flash Program
Perform the following procedure in order to flash program the Product Link. The Product Link is flashed in order to upgrade the software. Flash programming of the Product Link must also be done if the Product Link has been replaced. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the Product Link. The following procedure is used in order to FLASH software into the Product Link.
Note: Two communications adapters are available to flash electronic control modules. The 7X-1700 Communications Adapter can be used, or the 171-4400 Communication Adapter II .
- Procedure
- Connect the Data Link Cable between the Communication Adapter and the Electronic Technician.
- Connect the Data Link Cable between the Communication Adapter and the diagnostic connector of the machine.
- Use WinFlash in order to load the software.
Caterpillar Information System:
3512B Marine Auxiliary Engine Generator Set Alignment
Product Link 151/201 Electronic Control Module (ECM) - Replace
Product Link 151/201 Specifications
2002/10/01 Tampering With Emission Controls {1000}
2002/10/01 New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
G3520C and G3520E Generator Set Engines Cooling System
G3304 and G3306 Engines Visual Inspection
3054E Industrial Engine Introduction
SR4 HV and SR4B HV Generators Safety Messages
Product Link 151/201 Reference Parts Information
C11, C13 and C15 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
3512B Marine Auxiliary Engine Measuring Exhaust Temperature
Product Link 151/201 Diagnostic Code List
3054E Industrial Engine Basic Engine
3512B Marine Auxiliary Engine Electronic Control Module (ECM)
2002/11/01 The FLS/FTS PAR Dyno Calculator for the 3406E, C-15, and C-16 Engines is now Available as a Web Based Application {0701}
Product Link 151/201 MID 122 - CID 0168 - FMI 00
G3500 Engines Water Temperature Regulator
3054C Industrial Engine Engine Description
3054C Industrial Engine Model View Illustrations
Product Link 151/201 MID 122 - CID 0168 - FMI 01
Product Link 151/201 Using the Diagnostic Indicator to Determine Diagnostic Codes
2002/12/01 A Software Change Has Been Made to the Customer Communications Manual (CCM) {1926}
14H Motor Grader Machine Systems Circle Drive - Remove