Electronic Control Module (ECM) - Replace
Before the Product Link is replaced, ensure that replacement is absolutely necessary. The Product Link is seldom the cause of a fault. Always check that power is available to the Product Link. Battery voltage is required between contacts 1 and 2 of the machine harness connector for the Product Link. Continue ONLY if all other attempts to isolate the problem have failed. Always consult your dealership's Technical Communicator for possible consultation with Caterpillar. This consultation may greatly reduce the time that is required for a repair.
- Turn the disconnect switch and the key start switch to the OFF position. Disconnect the machine harness from the Product Link.
- Remove the Product Link.
- Make sure that the replacement Product Link is the correct part number.
- Connect the machine harness to the Product Link.
- Install the replacement Product Link.
Caterpillar Information System:
Product Link 151/201 Specifications
2002/10/01 Tampering With Emission Controls {1000}
2002/10/01 New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
G3520C and G3520E Generator Set Engines Cooling System
G3304 and G3306 Engines Visual Inspection
3054E Industrial Engine Introduction
SR4 HV and SR4B HV Generators Safety Messages
Product Link 151/201 Reference Parts Information
C11, C13 and C15 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
3512B Marine Auxiliary Engine Measuring Exhaust Temperature
C11, C13, and C15 On-highway Engines Model View Illustrations
3054E Industrial Engine Fuel System Pressure - Test
3512B Marine Auxiliary Engine Generator Set Alignment
Product Link 151/201 Electronic Control Module (ECM) - Flash Program
Product Link 151/201 Diagnostic Code List
3054E Industrial Engine Basic Engine
3512B Marine Auxiliary Engine Electronic Control Module (ECM)
2002/11/01 The FLS/FTS PAR Dyno Calculator for the 3406E, C-15, and C-16 Engines is now Available as a Web Based Application {0701}
Product Link 151/201 MID 122 - CID 0168 - FMI 00
G3500 Engines Water Temperature Regulator
3054C Industrial Engine Engine Description
3054C Industrial Engine Model View Illustrations
Product Link 151/201 MID 122 - CID 0168 - FMI 01
Product Link 151/201 Using the Diagnostic Indicator to Determine Diagnostic Codes