Reference Parts Information
Show/hide table
Parts That Are Required To Install The Product Link     | |||
1     | 209-6417 Communication Electronic Control Module (Product Link 201) OR 209-6416 Communication Electronic Control Module (Product Link 151)     |
Choose 1 Module.     | |
2     | 207-6795 Installation Kit     | Required For Each Module     | |
207-3814 Splice (Y)     | 4     | ||
6V-8490 Bolt     | 4     | ||
4L-7125 Lockwasher     | 4     | ||
6V-8225 Nut     | 4     | ||
170-7142 Control Harness As     | 1     | ||
230-1340 Film (Product Link) (English) (1)     | 1     | ||
3     | Antennas and Mounting     | Choose 1 Antenna.     | |
207-6796 Roof Antenna As (20 feet)     | 1     | ||
207-6797 Roof Antenna As (3 feet)     | |||
207-6798 Roof Antenna As (20 feet magnetic)     | |||
207-6799 Roof Antenna As (3 feet magnetic)     | |||
223-4297 Roof Antenna As (3 feet flex)     | |||
223-4298 Roof Antenna As (20 feet flex)     | |||
207-6136 Plate (Mounting)     | Optional     | ||
4     | 207-6800 Shock Mount Kit (2)     | 1     | |
6V-7728 Bolt     | 4     | ||
8C-5608 Spacer     | 4     | ||
8C-5607 Mount     | 8     | ||
9X-6165 Washer     | 4     | ||
170-9198 Plate     | 2     |
Show/hide table
( 1 ) | 230-1341 for all warning films in foreign languages. |
( 2 ) | Order this part when shock mounting is required. |
Note: The Electrical System Schematic for the machine is recommended for the installation.
Show/hide table
Required Tools and Parts     | |
Part Number and Description     | Quantity     |
6V-7070 Digital Multimeter     | 1     |
175-3700 Connector Repair Kit     | 1     |
140-9944 Terminal Repair Kit     | 1     |
1U-5804 Crimp Tool     | 1     |
110-8769 Wire (Option for alternator connections)     | 1     |
8D-8719 Holder and Wire Assembly (Fuse)     | 1     |
5G-8871 Boss (Option)     | 4     |
199-9785 Wire Splice (1)     | |
115-8109 Wire Splice (Sealed)     | |
See Troubleshooting, "Service Tools". The Computer must have at least version 3.1 of the Electronic Technician.     |
Show/hide table
( 1 ) | This wire is an alternate wire for the splice that is included in the installation kit. |
Note: Certain installations may require the use of a welder for attaching weld bosses to the machine.
Note: If the whip portion of the antenna is ever damaged, the 172-6755 381 mm (15 inch) Whip Antenna or the 223-4296 152.4 mm (6 inch) Whip Antenna is the replacement.
Note: If the old product link 201 metal whip antenna is ever damaged, the 205-3090 is the replacement. If the old product link 201 antenna cable is ever damaged, the 180-3837 is the replacement.
Caterpillar Information System:
C11, C13 and C15 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
3512B Marine Auxiliary Engine Measuring Exhaust Temperature
C11, C13, and C15 On-highway Engines Model View Illustrations
3054E Industrial Engine Fuel System Pressure - Test
G3520C and G3520E Generator Set Engines Lubrication System
Product Link 151/201 Reports and Messages Not Available
Product Link 151/201 Electronic Service Tool Does Not Communicate with ECM
Product Link 151/201 Diagnostic Capabilities
Product Link 151/201 Service Tools
3512B Marine Auxiliary Engine Restriction of Air Inlet and Exhaust
3516B Generator Set Engines with Dynamic Gas Blending Fuel System Inspection
3512B Marine Auxiliary Engine Safety Messages
SR4 HV and SR4B HV Generators Safety Messages
3054E Industrial Engine Introduction
G3304 and G3306 Engines Visual Inspection
G3520C and G3520E Generator Set Engines Cooling System
2002/10/01 New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
2002/10/01 Tampering With Emission Controls {1000}
Product Link 151/201 Specifications
Product Link 151/201 Electronic Control Module (ECM) - Replace
3512B Marine Auxiliary Engine Generator Set Alignment
Product Link 151/201 Electronic Control Module (ECM) - Flash Program
Product Link 151/201 Diagnostic Code List
3054E Industrial Engine Basic Engine