Plug In Place of a Bolt or a Stud for the Front Engine Mount {1152}
- Machine Engines:
- 3054
- 3056
Show/hide table
 | |
| Illustration 1 | g00920091 |
(1) Plug (2) Stud | |
102-9460 Plug is for the 3056 Machine Engine.
101-2987 Plug is for the 3054 Machine Engine.
Use plug (1) when any of the front threaded mounting holes is not being used to mount the engine. Plug (1) is used in place of stud (2) or a bolt. The threaded hole is drilled into the crankcase of the engine. Plug (1) is supplied with an anaerobic sealant. The anaerobic sealant is already applied to the threads from the factory. For any reason that plug (1) is removed, all of the dirt and all of the oil in the threaded hole into the block must be cleaned before reinstalling the plug. In order to reuse plug (1), clean the old sealant from plug (1) and apply 4C-9507 Retaining Compound to the threads.
Caterpillar Information System:
C-15 Truck Engine Vibration Damper
C-10 and C-12 Truck Engines Cylinder Liner
3054E Industrial Engine Engine Oil Bypass Valve
3054E Industrial Engine Electric Starting Motor
3054E Industrial Engine Alternator and Regulator
3500 Marine Engines Engine Design
C13, C15, and C18 Generator Set Engines Vibration Damper and Pulley
3126B Marine Engines Event Codes
C9 Urban Transit Bus Engine Starting the Engine
C-15, C-16, and C-18 Truck Engines Piston and Rings
C-15, C-16, and C-18 Truck Engines Cylinder Liner
2002/09/01 Check the Calibration of the Wastegate Actuator in order to Diagnose a Low Boost Condition {1057}
C7 and C9 On-Highway Engines 0032-05 Turbo Wastegate Solenoid current low
3054E and 3056E Industrial Engines Self-Diagnostics
C7 and C9 On-Highway Engines 0032-06 Turbo Wastegate Solenoid current high
C7 and C9 On-Highway Engines 0032-11 Turbo Wastegate Solenoid current mismatch
C-15, C-16, and C-18 Truck Engines Crankshaft
3054E and 3056E Industrial Engines Diagnostic Lamp
3054E and 3056E Industrial Engines Engine Operation with Active Diagnostic Codes
3054E and 3056E Industrial Engines Engine Operation with Intermittent Diagnostic Codes
2002/10/01 The Junction Block That Is Used In The Coolant Lines For The Turbocharger Has Been Improved {1380}
C9 Urban Transit Bus Engine Vehicle Speed Parameters
C-15, C-16, and C-18 Truck Engines Camshaft
3054E and 3056E Industrial Engines Cold Weather Starting