C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Caterpillar


Engine Oil Relief Valve

Usage:

CB-214E 214


Illustration 1g00820218

Note: When the engine oil relief valve is installed, ensure that all components are clean. Lightly lubricate all components with clean engine oil.

(1) O-ring

A new O-ring should be used when the engine oil relief valve is installed.

(2) Tighten the engine oil relief valve to the following torque. ... 64 N·m (47 lb ft)

The engine oil pressure at the engine oil relief valve is the following value.

C1.1/3011C and C1.6 ... 304 to 500 kPa (44 to 73 psi)
C1.5/3013C ... 262 to 359 kPa (38 to 52 psi)
C0.5, C0.7 and C2.2/3024C and C2.2/3024CT ... 352 to 448 kPa (51 to 65 psi)

Note: Always remove the engine oil relief valve before removing or installing the crankshaft. Damage to the engine oil relief valve or damage to the crankshaft may occur.

Caterpillar Information System:

C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C-15 Truck Engine Wastegate Solenoid
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
C-15 Truck Engine Fuel Filter Base
C-10, C-12 and C-15 On-highway Engines Customer Specified Parameters Table
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Camshaft Bearing Position
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
C18 Generator Set Engine Crankcase Breather - Clean
G3500B Engines Engine Design
3054C Engines for Caterpillar Built Machines Gear Group (Front)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C9 Urban Transit Bus Engine Customer Specified Parameters Table
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
Torque Specifications Air Brake Fittings
Torque Specifications Bulkhead Nuts
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System
3512B Marine Auxiliary Engine Manual Barring Group - Air Interlock
C-18 Truck Engines Engine Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.