Wastegate Solenoid
Show/hide table
 | |
| Illustration 1 | g00909202 |
(1) Outlet fitting
(2) Inlet fitting
(3) Vent
(4) Wastegate solenoid ... 13 ± 1.5 N·m (10 ± 1 lb ft)
(5) Manifold
Caterpillar Information System:
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
C-15 Truck Engine Fuel Filter Base
C-10, C-12 and C-15 On-highway Engines Customer Specified Parameters Table
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Camshaft Bearing Position
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
C18 Generator Set Engine Crankcase Breather - Clean
G3500B Engines Engine Design
3054C Engines for Caterpillar Built Machines Gear Group (Front)
3054E Industrial Engine Fuel Injection Nozzles
3408C, 3412C and 3412D High Performance Marine Engines Exhaust Manifold
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C9 Urban Transit Bus Engine Customer Specified Parameters Table
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
Torque Specifications Air Brake Fittings
Torque Specifications Bulkhead Nuts
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System