C-15 Truck Engine Caterpillar


Fuel Filter Base

Usage:

C-15 MBN



Illustration 1g00908559

(1) Apply 155-0695 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 7.7 mm (0.30 inch)

(2) The sealing surface of the base to the end of the stud is the following dimension. ... 24.6 ± 1.3 mm (0.97 ± 0.05 inch)

(3) Stud

Tighten the stud to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)

(4) Fitting

Tighten the fitting to the following torque. ... 8 ± 3 N·m (71 ± 27 lb in)

Caterpillar Information System:

C-10, C-12 and C-15 On-highway Engines Customer Specified Parameters Table
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Camshaft Bearing Position
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
C18 Generator Set Engine Crankcase Breather - Clean
G3500B Engines Engine Design
3054C Engines for Caterpillar Built Machines Gear Group (Front)
3054E Industrial Engine Fuel Injection Nozzles
3408C, 3412C and 3412D High Performance Marine Engines Exhaust Manifold
C4.4 (Mech) Industrial Engine Valve Mechanism Cover
C-15 Truck Engine Water Lines
3054E Industrial Engine Crankshaft Seals
3054E Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
C-10 and C-12 Truck Engines Fuel System
C-15 Truck Engine Wastegate Solenoid
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C9 Urban Transit Bus Engine Customer Specified Parameters Table
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.