Machine Security System Caterpillar


MID 124 - CID 0817 - FMI 04

Usage:

143H 1AL
产生此代码的情况:

当备用蓄电池的电压在 1.5 DCV 和 1.7 DCV 之间时,记录此诊断代码。 此诊断代码可导致以下情况出现:

  • 保存的数据丢失

  • 实时时钟丢失

测试步骤 1. 确认诊断代码。

  1. 将断路开关转到 ON 位置。

  1. 将 ET 连接到 ECM 后清除故障代码。

  1. 确定是否存在 CID 0817 FMI 12。

预期结果:

存在 CID 0817 FMI 12。

结果:

  • 是 - 存在诊断代码。 MSS ECM 的内部蓄电池低电压。

    修复: MSS ECM 内的蓄电池无法更换。 必须更换整个 ECM。 请参阅测试和调整部分, "电子控制模块(ECM)- 更换"。

    停止

  • 否 - 该编码不再存在。 MSS ECM 的内部蓄电池不再低电压。停止
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.