Contour Series Seat Caterpillar


Air Suspension With Air Valve Knob Height Adjustment - Assemble

Usage:

769C 01X

安装程序




    图 1g00891451

  1. 安装压缩器组合 (25) 以装上 (26) 。 确保压缩器组合 (25) 牢靠固定在座上 (26) 。



    图 2g00872046

  1. 安装螺栓 (24) 以便把压缩器组合 (25) 装到交叉式臂架组合 (11) 。



    图 3g00872043

    ------ WARNING! ------

    弹簧压缩零件如果安装不当,会伤害人体。

    为避免伤害,遵照出版的装配程序,并穿上保护装备。


  1. 安装螺栓 (23) 以便把弹簧组合 (18) 装到交叉式臂架组合 (11) 。 把软管组合 (22) 接到弹簧组合 (18) 。



    图 4g00872037

  1. 安装轴 (20) 以便把 肘节组合 (21) 装到交叉式臂架组合 (11) 。 把轴 (20) 上2只螺母拧紧至扭矩为15 ± 3 N·m (11 ± 2 lb ft)。



    图 5g00872031

  1. 安装轴组合 (19) 以便把牵系带 (11A) 和交叉式臂架组合 (11) 装到壳体组合 (14) 。 把轴组合 (19) 的螺母拧紧至扭矩为20 ± 5 N·m (15 ± 4 lb ft)。 安装止块,以防止交叉式臂架组合 (11) 倒下。



    图 6g00872029



    图 7g00872020

  1. 安装螺丝 (17) 以便把壳体组合 (14) 装到弹簧组合 (18) 。

  1. 安装轴 (15) 以便把 肘节组合 (16) 装到交叉式臂架组合 (11) 。 把轴上2只螺母拧紧 (15) 至扭矩为15 ± 3 N·m (11 ± 2 lb ft)。



    图 8g00897454



    图 9g00872007

  1. 在减震器 (13) 安装轴承 (12B) 。

  1. 安装螺栓 (12) 以便把减震器 (13) 装到交叉式臂架组合 (11) 和壳体组合 (14) 。 取下止块。

    注: 图示8 显示了防松垫圈 (12A) , 轴承 (12B) , 垫圈 (12C) , 螺母 (12D) 和防松螺母 (12E) 的各个位置。

  1. 如果座椅的减震器放在另一侧, 重复步骤8 和 9。



    图 10g00871994

  1. 把装配电路 (9) 和软管组合 (10) 与气阀 (8) 连接。



    图 11g00871971

  1. 把气阀 (8) 装到上部壳体组合 (7) 。 把上部壳体组合 (7) 在座椅上定位。



    图 12g00871951

  1. 安装钢丝绳绑带 (6) 使装配电路 (9) 在上部壳体组合 (7) 固定牢靠。



    图 13g00876043

  1. 安装轴组合 (5) 。 把轴组合 (5) 的螺母拧紧至扭矩为 20 ± 5 N·m (15 ± 4 lb ft)。

  1. 把板件 (4) 在座椅上定位。 安装防松垫圈 (3A) 和螺母 (3) 使气阀 (8) 在座上固定牢靠。 拧紧调整按钮 (1) 的设定螺丝, 使调整按钮 (1) 与气阀 (8) 的固定牢靠。



    图 14g00871915

  1. 把座圈 (2) 装到座上。

Caterpillar Information System:

814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Hydraulic System Pump Performance (Implement) - Test
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Sensors
RM-350B Reclaimer/Mixer Machine Systems Steering Stops (Front) - Check and Adjust
RM-350B Road Reclaimer/Soil Stabilizer Engine Support (Front) - Remove and Install
Comfort Series Seat For Caterpillar Machines Serial Number Effectivity
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0264 FMI 08 Decel Throttle Position signal abnormal
2002/04/29 A New Rear Wheel Improves the Service Life {4001, 4201}
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Stabilizer System
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Transmission Power Flow
2002/07/08 Special Instruction, REHS1276, "Conversion of the Joystick from Fork Control to Bucket Control" is now Available {5063, 5705, 6107}
2003/03/03 New Automatic Brake Application Switches Available {1408}
RM-350B Reclaimer/Mixer Machine Systems Power Shift Transmission (Propel) and Rotor Transmission Pressure - Test
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Engine and Machine Warm-Up
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt Cylinder - Remove
2002/04/29 A New Hub and an Updated Spindle Improve the Service Life of the Bearings {4001, 4201}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt Cylinder - Install
2011/10/06 The Part Numbers for the Electronic Controls Have Changed {7600, 7610, 7620}
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System Transmission Does Not Upshift
Caterpillar Monitoring System Normal Mode
Caterpillar Monitoring System Service Meter Mode
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Load Indicator Light
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Instrument Panel (Lower) - Remove
RM-350B Road Reclaimer/Soil Stabilizer Lubricant Viscosities
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Switches
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.