A New Block and A Bail Arm are Used on the Lift Arm {1408, 6119}
- Wheel Loaders:
- 994D (S/N: 3TZ1-UP)
Description of Change: A new block and a new bail arm are used on the lift arms. The new block is narrower than the former block. The smaller area results in lower stresses when the block is welded to the lift arms. This improves the life of the lift arms.
Adaptable To: The new 219-4769 Block and the new 216-6952 Bail Arm are effective with 994D S/N:3TZ287-UP
. The new 219-4769 Block and the new 216-6952 Bail Arm are adaptable to first production of the machines that are listed. The new 219-4769 Block replaces the former 112-2918 Block. The new 216-6952 Bail Arm replaces the former 110-8904 Bail Arm.
Show/hide table
 | |
| Illustration 1 | g00883628 |
The upper left side of the front frame (1) Bail arm. (2) Block. | |
Caterpillar Information System:
IT28G Integrated Toolcarrier and 928G Wheel Loader Torque Converter
3126B Engine for Caterpillar Built Machines Cat Data Link Circuit - Test
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Water Pump
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt and Tip Cylinder - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt and Tip Cylinder - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Lift Cylinder - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
844 Wheel TractorMachine Systems Main Control Valve - Disassemble
3056E Industrial Engine Water Pump
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Lift Cylinder - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission
D5N Track-Type Tractor Bevel and Transfer Gears - Power Shift
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Steering System Metering Pump (HMU)
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train Differential Pinion Preload - Adjust
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Rated Load
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train Output Transfer Gears - Adjust
3126B Engine for Caterpillar Built Machines Fuel Pump Relay Circuit - Test
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Operator Controls
K65-12B Voltage Regulator Electrical
651E Wheel Tractor-Scraper Secondary Steering
844 Wheel TractorMachine Systems Main Control Valve - Assemble
3524B Engines for Off-Highway Trucks E100 Low Engine Oil Pressure Warning