Engine Oil Filter Base - Assemble
组装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将柱塞 (2) 和弹簧 (3) 安装在机油滤清器底座组件 (1) 中。
Show/hide table
 | |
| 图 1 | g01083088 |
Show/hide table
 |
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 安装盖 (4) 。
- 安装 O 型密封圈。
End By: 安装发动机机油滤清器底座。 请参阅 拆解和组装, "发动机机油滤清器底座 - 安装"。
Caterpillar Information System:
797B Off-Highway Truck Air System Control Valve (Air Dryer)
G3500 Generator Sets Overhaul (Major)
2002/04/01 A New Connecting Rod Is Available {1218}
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
G3600 Engines Inlet Air System - Inspect
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
G3500B Engines Ignition Transformer
3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
G3500 Generator Sets Engine Crankcase Breather - Clean
3056E Industrial Engine Valve Mechanism Cover
2002/06/01 Corrections to Disassembly and Assembly, RENR1333, "3618 Engine" , "Piston and Connecting Rods - Install" {1214}
Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216} Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216}
G3500 Generator Sets Plate Locations and Film Locations
G3500 Generator Sets Emergency Stopping
3412E, C30 and C32 Marine Engines System Overview
3056E Industrial Engine Fuel Filter Base
C18 Generator Set Engine Rating Definitions
3500 Engines Mechanical Gauge - Test
3056E Industrial Engine Turbocharger
3412E, C30 and C32 Marine Engines Water Temperature Regulator - Remove and Install
3056E Industrial Engine Crankcase Breather
C18 Marine Engines Sensors and Electrical Components