Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) in order to remove engine oil filters (1).
- Remove bolts (3).
- Remove oil filter base (2).
Show/hide table
Illustration 1 | g01082954 |
Caterpillar Information System:
G3500B Engines Ignition Transformer
3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
G3500 Generator Sets Engine Crankcase Breather - Clean
3056E Industrial Engine Valve Mechanism Cover
G3500 Generator Sets Engine Oil Level - Check
3056E Industrial Engine Fuel Priming Pump
G3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
3618 Engine Testing the Cooling System
3056E Industrial Engine Fuel Injection Pump
3056E Industrial Engine Fuel Injection Lines
3054E and 3056E Industrial Engines Model View Illustrations
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
G3600 Engines Inlet Air System - Inspect
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
2002/04/01 A New Connecting Rod Is Available {1218}
G3500 Generator Sets Overhaul (Major)
797B Off-Highway Truck Air System Control Valve (Air Dryer)
C27 and C32 Generator Set Engines Engine Oil Filter Base - Assemble
2002/06/01 Corrections to Disassembly and Assembly, RENR1333, "3618 Engine" , "Piston and Connecting Rods - Install" {1214}
Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216} Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216}
G3500 Generator Sets Plate Locations and Film Locations
G3500 Generator Sets Emergency Stopping
3412E, C30 and C32 Marine Engines System Overview