| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| ZZ | 5P-2299 | Flared Plug | 2 |
| 3R-6789 | Flared Cap | 2 | |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose (1) and hose assemblies (3) from marine transmission oil cooler (2).
- Disconnect tube assemblies (5).
- Remove bolts (4) and marine transmission oil cooler (2).
| |
| Illustration 1 | g01092716 |
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position marine transmission oil cooler (2) on the bracket assembly. Install bolts (4).
- Connect tube assemblies (5).
- Connect hose assemblies (3) and hose (1) to marine transmission oil cooler (2).
|
| |
| Illustration 2 | g01092716 |