3056E Industrial Engine Caterpillar

Fuel Injection Pump

Usage:

3056E 356

Show/hide table




Illustration 1	g00889064

(1) Tighten the compression nut to the following torque. ... 9 N·m (80 lb in)

(2) Tighten the compression to the following torque. ... 9 N·m (80 lb in)

(3) Tighten the Cap nut to the following torque. ... 22 N·m (16 lb ft)

(4) Tighten the banjo bolt to the following torque. ... 25 N·m (19 lb ft)

Tighten the nuts (not shown) for the fuel injection pump flange to the timing case to the following torque. ... 22 N·m (16 lb ft)

Tighten the bolt (not shown) for the support bracket for the fuel injection pump to the cylinder block to the following torque. ... 44 N·m (32 lb ft)

Tighten the bolt (not shown) for the mounting plate to the fuel injection pump to the following torque. ... 22 N·m (16 lb ft)

Caterpillar Information System:

3056E Industrial Engine Fuel Injection Lines

3054E and 3056E Industrial Engines Model View Illustrations

3618 Engine Water Temperature Regulator - Test

3618 Engine Test Tools for the Cooling System

3412E, C30 and C32 Marine Engines Engine Cranks but Will Not Start

2002/04/01 A New Housing Assembly Includes Improved Bearings For The Fresh Water Pump {1361}

3412E, C30 and C32 Marine Engines Coolant Temperature Is Too High

C-10, C-12 and C-15 On-Highway Engines Fuel System Secondary Filter - Replace

C-10, C-12 and C-15 On-Highway Engines Fuel System - Prime

C-10, C-12 and C-15 On-Highway Engines Engine Oil and Filter - Change

G3500B Engines Valve Data Sheet

C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-15 Truck Engines Only

3618 Engine Testing the Cooling System

G3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect

3056E Industrial Engine Fuel Priming Pump

G3500 Generator Sets Engine Oil Level - Check

3056E Industrial Engine Valve Mechanism Cover

G3500 Generator Sets Engine Crankcase Breather - Clean

C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only

3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install

G3500B Engines Ignition Transformer

3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove

3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install

G3600 Engines Inlet Air System - Inspect