Auxiliary Drive Pulley
Show/hide table
| |
| Illustration 1 | g00874567 |
(1) Oil seal
- Lubricate the lip of the seal with clean engine oil.
- Apply 7M-7456 Bearing Mount Compound to the outside circumference of the seal.
(2) O-ring seal
- Lubricate the seal with clean engine oil.
- Apply 7M-7456 Bearing Mount Compound to the outside diameter of the pulley adapter.
(3) Sleeve
- Align the sleeve even with the hub of the pulley.
Show/hide table
| |
| Illustration 2 | g00874588 |
(4) Pulley adapter
(5) Bearing
- Align the hole in the bearing with the oil supply hole in the pulley adapter.
- The center of the bearing should be
18 ± .5 mm (0.7087 ± 0.0197 inch) from the face of the pulley adapter.
Bore in the bearing after assembly ...
Caterpillar Information System:
3126B Marine Engines Coolant Temperature Is Too High
3176C and 3196 Engines for Caterpillar Built Machines Connecting Rod
2002/03/01 Be Sure To Order The Correct Diaphragm For Servicing The Mixer Of The Carburetor {1266}
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0127 - FMI 08
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0127 - FMI 04
2002/04/01 A Different Mounting Nut Is Required For The Hydrax Actuator {1716}
C9 Marine Engines Event Codes
Alternator - Delco 27SI Residual Magnetism - Restore
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0127 - FMI 03
3500 Industrial Engine Attachments Electrical System
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injector Solenoid Circuit - Test
3406E, C12, C15 and C18 Marine Engines Injector Solenoid Circuit - Test
3412E and C30 Engines Engine Design
3126B Truck Engine Exhaust Particulate Filter - Test
3126B Truck Engine Exhaust Particulate Filter - Clean
3500 Industrial Engine Attachments Troubleshooting
2002/03/01 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modes Of Operation
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Programming Parameters
2002/03/01 Caterpillar Electronic Technician (ET) Software Is Now Available For G3400 Engines And G3500 Engines That Are Equipped With An Electronic Ignition System (EIS) Or Air/Fuel Ratio Controls {0785}
SR4 Generator with VR3 or VR4 Voltage Regulator Coupling - Remove
3412E and C30 Engines Connecting Rod
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit