UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Caterpillar


Keyboard Shortcuts

Usage:

UPS 250 APZ

Key Help Menus and Functions

Table 1
CTRL Help Menu    
CTRL-\     Show bypass available status    
CTRL-A     Send Telemetry Limits To CS View    
CTRL-B     Enter Bypass (Maintenance) Mode    
CTRL-C     Resend Calibration Prompt to UPS View    
CTRL-D     Download the Event Log    
CTRL-G     Dump Skiip currents from FPGA    
CTRL-H     Help Menu    
CTRL-J     Report current diagnostic information    
CTRL-L     Toggle Discharge Disable    
CTRL-M     Enter Manual Mode    
CTRL-N     Revision History    
CTRL-O     Enter Online Mode    
CTRL-P     Clear Password Enables    
CTRL-Q     Reset Modem NVRAM    
CTRL-R     Reset The Microprocessor    
CTRL-S     Enter Bypass Mode Spin-down State    
CTRL-V     Disable Vacuum shutdowns    
CTRL-W     Toggle Modem Off-hook / On-hook    
CTRL-X (1) (2) (3)     Brake the rotor to zero speed    
CTRL-Y     Dump Modem configuration    
CTRL-Z     Dump Setpoints to Screen    
CTRL-[     Manual GSC Start    
CTRL-]     Manual GSC Stop    
ALT-H     ALT Key Help Menu    
( 1 ) 7700 RPM to 20 RPM in 15 minutes
( 2 ) This function is only allowed once every 24 hours due to armature heating
( 3 ) The PC must be connnected. The keyswitch on the MMU must be in the "Online" postion.

Table 2
ALT Help Menu    
ALT-A     Clear Static Switch Enable    
ALT-C     Send system Calibration Factors over CAN    
ALT-D     AVR Demand FPGA reading    
ALT-E     Ethernet Loopback Test    
ALT-F     Force Op. Params on other MMUs    
ALT-H     ALT Key Help Menu    
ALT-I     EPO Switch statuses    
ALT-J     Report current ethernet diagnostic information    
ALT-L     Synchronize Event Logs    
ALT-M     Show MMU status registers    
ALT-N     Toggle Notification debug msgs    
ALT-O     Toggle Op. Param match over CAN.    
ALT-P     Cancel current page.    
ALT-R     Regulation Only Mode    
ALT-S     Enter AVR Mode Spin-down State    
ALT-T     Show Telemetry and Status Registers    
ALT-V     Verify PCC serial flash configuration page    
ALT-W     Toggle Discharge Walk-in to Input Voltage    
ALT-Z     Parameter List that is not Default Parameters    

Caterpillar Information System:

3126E On-highway Engine Torque Limit Switch Circuit - Test
2002/02/01 Parts Manuals For The Following Products Are Now Provided On A CD-ROM {7000, 7002}
C-10, C-12, C-15 and C-16 Industrial Engines CID 0273 FMI 00 Turbo Outlet Pressure above normal
CIPI UNDERCARRIAGE Arrangements: 3Q6662, 6Z7861, 6Z7885, 6Z7947, 6Z7957, 6Z7999, 9Q5044, 9Q5065, 9Q5082, 9Q5090, 9Q5093, 9Q5115, 9Q5118, 9Q5126, 9Q5135, 9Q5141, 9Q5168, 9Q5175, 9Q5206, 9Q5255, 9Q5259, 9Q5268, 9Q5412, 9Q5436, 9Q5464, 9Q5514, 9Q5617, 9 Travel Motor - Test - Measurement of Case Drain Oil
3500 Industrial Engines Coolant Temperature Switch
3126E On-highway Engine Valve Mechanism Cover Base - Remove and Install
3176C and 3196 Marine Engines Engine Control Module
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Fuel Consumption
3126E On-highway Engine Valve Mechanism Cover - Remove and Install
3408E and 3412E Industrial Engines Engine Misfires, Runs Rough or Is Unstable
3408E and 3412E Industrial Engines Engine Cranks but Will Not Start
3408E and 3412E Industrial Engines Can Not Reach Top Engine RPM
G3612 and G3616 Engines Aftercooler - Remove
3126B Marine Engines Flash Codes
3500 Generator Set Engines Temperature Contactor
2002/02/01 Correction to Testing and Adjusting, "Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines" {4490}
3500 Generator Set Engines Temperature Contactor
2002/02/01 Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Diagnostic Codes - Flash Codes
2002/02/11 Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Final Drive Ring Gear Removal
3500 Generator Set Engines Pressure Contactor
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Final Drive Sun Gear Removal
3500 Generator Set Engines Pressure Contactor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.