2001/12/17 Caterpillar


Special Instruction, REHS1198 , "Removal and Installation of the Serrated Cutting Edge on Rock Buckets" {6801}

Usage:

DFK
Work Tool:
Rock Bucket (S/N: DFK1-UP)

The Special Instruction, REHS1198, "Removal and Installation of the Serrated Cutting Edge on Rock Buckets" is available.

This Special Instruction describes the procedure for the removal and installation of the serrated cutting edge on the rock buckets for the following Wheel Loaders: 988, 990 and 992.

The Special Instruction, REHS1198, "Removal and Installation of the Serrated Cutting Edge on Rock Buckets" can be obtained through the normal literature ordering channels. The publication can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

303 CR Mini Hydraulic Excavator Hydraulic System Oil Filter (Return) - Replace
385B Excavator Machine System Specifications Bucket
320C Excavator Machine System Specifications Recoil Spring
320C Excavator Machine System Specifications Final Drive
5110B, 5110B L and 5110B MH Excavator Hydraulic System Relief Valve (Pilot)
320C Excavator Machine System Specifications Travel Motor
330C Forest Machine Hydraulic System Travel Parking Brake
385B and 5090B Excavators Excavator Systems Piston Motor - Disassemble - Hydraulic Cooling Fan
320C Excavator Machine System Specifications Hydraulic Tank and Filter
304.5 Mini Hydraulic Excavator Decommissioning and Disposal
303 CR Mini Hydraulic Excavator Hydraulic System Oil - Change
S440, S465 and S490 Shear Hydraulic Fittings - Inspect
330C Forest Machine Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
330C Forest Machine Hydraulic System Bypass Valve (Return) - Bypass Check Valve
330C Forest Machine Hydraulic System Hydraulic Tank and Filter
325D and 329D Excavators Hydraulic System Oil Filter (Return) - Case Drain Filter
385B and 5090B Excavators Engine Supplement Engine Rear Mount - Install
5110B, 5110B L and 5110B MH Excavator Hydraulic System Solenoid Valves (Pilot Manifold)
5230B Excavator Engine Supplement Radiator - Install
330C Forest Machine Hydraulic System Gear Pump (Fan Motor)
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head - Inspect
330C Excavator Tool Control System System 2: Combined Function - Two Hydraulic Foot Pedals
5110B, 5110B L and 5110B MH Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
314D Excavator Cab Door
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.