Hydraulic System Oil Filter (Return) - Replace
Show/hide table
| NOTICE |
|---|
|
Hot oil can cause personal injury. Remove the hydraulic oil filler cap only when the engine is stopped. Allow time for the hydraulic system to cool. Remove hydraulic oil filler cap slowly in order to relieve pressure. |
The hydraulic oil tank is located under the access cover on the right side of the machine.
- Open the right access cover.
- Clean the area thoroughly in order to prevent dirt from entering the hydraulic oil tank.
- Slowly loosen the hydraulic oil filler cap in order to relieve the pressure in the hydraulic oil tank.
Show/hide table
Illustration 1 g00846912 Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.
- Remove bolt (1), washer (2), and right cover (3).
- Remove spring (5), valve (6), and element (7) from the case.
- Inspect O-ring (4). Replace the O-ring if the O-ring is worn or damaged.
- Reverse steps 4 and 5 in order to install the new element.
- Tighten the hydraulic oil filler cap.
- Close the right access cover.
Caterpillar Information System:
385B Excavator Machine System Specifications Bucket
320C Excavator Machine System Specifications Recoil Spring
320C Excavator Machine System Specifications Final Drive
5110B, 5110B L and 5110B MH Excavator Hydraulic System Relief Valve (Pilot)
320C Excavator Machine System Specifications Travel Motor
330C Forest Machine Hydraulic System Travel Parking Brake
385B and 5090B Excavators Excavator Systems Piston Motor - Disassemble - Hydraulic Cooling Fan
320C Excavator Machine System Specifications Hydraulic Tank and Filter
304.5 Mini Hydraulic Excavator Decommissioning and Disposal
303 CR Mini Hydraulic Excavator Hydraulic System Oil - Change
S440, S465 and S490 Shear Hydraulic Fittings - Inspect
385B and 5090B Excavators Engine Supplement Engine Rear Mount - Remove
2001/12/17 Special Instruction, REHS1198 , "Removal and Installation of the Serrated Cutting Edge on Rock Buckets" {6801}
330C Forest Machine Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
330C Forest Machine Hydraulic System Bypass Valve (Return) - Bypass Check Valve
330C Forest Machine Hydraulic System Hydraulic Tank and Filter
325D and 329D Excavators Hydraulic System Oil Filter (Return) - Case Drain Filter
385B and 5090B Excavators Engine Supplement Engine Rear Mount - Install
5110B, 5110B L and 5110B MH Excavator Hydraulic System Solenoid Valves (Pilot Manifold)
5230B Excavator Engine Supplement Radiator - Install
330C Forest Machine Hydraulic System Gear Pump (Fan Motor)
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head - Inspect
330C Excavator Tool Control System System 2: Combined Function - Two Hydraulic Foot Pedals
5110B, 5110B L and 5110B MH Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust