Engine Rear Mount - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| (A) | 1U-7527 | Ram | 1 |
| 1U-5230 | Hand Hydraulic Pump | 1 | |
- Remove bolts (1) and remove sheet assembly (2) .
Show/hide table
 | |
| Illustration 1 | g00846650 |
- Remove bolts (3) and remove sheet (4) .
Show/hide table
 | |
| Illustration 2 | g00846671 |
- Remove bolts (5) and remove sheet (6) .
Show/hide table
 | |
| Illustration 3 | g00846710 |
- Open the hood and the engine access door that is located on the right side of the engine.
- Remove bolts (7) and remove sheet assembly (8) .
Show/hide table
 | |
| Illustration 4 | g00846742 |
- Remove bolts (9) and the washers. Remove rubber mounts (10) that are located under the washers.
Show/hide table
 | |
| Illustration 5 | g00846750 |
- Place Tooling (A) between the frame and the flywheel housing. Raise the engine and remove rubber mounts (11) .
Show/hide table
 | |
| Illustration 6 | g00846795 |
- Remove bolts (12) and remove sheet assembly (13) that is located on the left side of the engine.
Show/hide table
 | |
| Illustration 7 | g00846821 |
- Remove bolts (14) and the washers. Remove rubber mounts (15) that are located beneath the washers.
Show/hide table
 | |
| Illustration 8 | g00846851 |
- Place Tooling (A) between the frame and the flywheel housing.
Show/hide table
 | |
| Illustration 9 | g00846866 |
- Raise the engine and remove rubber mounts (16) .
Show/hide table
 | |
| Illustration 10 | g00846876 |
Caterpillar Information System:
5110B, 5110B L and 5110B MH Excavator Hydraulic System Pilot Manifold
385B and 5090B Excavators Engine Supplement Battery - Remove and Install
325C Excavator Alternate Exit
308C CR Excavator Window Wiper and Washer Control
314D Excavator Window (Front)
325C Excavator Seat
385B and 5090B Excavators Engine Supplement Engine Enclosure Group - Remove and Install
385B and 5090B Excavators Engine Supplement Electric Starting Motor - Remove and Install
5230B Excavator Engine Supplement Radiator - Remove
330C Excavator Machine System Specifications Air Conditioner Lines
385B and 5090B Excavators Machine System Specifications Bucket Cylinder
385B Excavator Fuel Tank Shutoff and Drain Control
S440, S465 and S490 Shear Hydraulic Fittings - Inspect
303 CR Mini Hydraulic Excavator Hydraulic System Oil - Change
304.5 Mini Hydraulic Excavator Decommissioning and Disposal
320C Excavator Machine System Specifications Hydraulic Tank and Filter
385B and 5090B Excavators Excavator Systems Piston Motor - Disassemble - Hydraulic Cooling Fan
330C Forest Machine Hydraulic System Travel Parking Brake
320C Excavator Machine System Specifications Travel Motor
5110B, 5110B L and 5110B MH Excavator Hydraulic System Relief Valve (Pilot)
320C Excavator Machine System Specifications Final Drive
320C Excavator Machine System Specifications Recoil Spring
385B Excavator Machine System Specifications Bucket
303 CR Mini Hydraulic Excavator Hydraulic System Oil Filter (Return) - Replace