308C CR Excavator Caterpillar


Window Wiper and Washer Control

Usage:

308C KCX


Illustration 1g00846496

Window Wiper (1) - Push the top of switch (1) in order to activate the window wiper. Push the bottom of switch (1) in order to deactivate the window wiper.


NOTICE

If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.


Window Washer (2) - Push switch (2) in order to activate the window washer. While the switch is depressed, washer fluid will spray from the nozzle. The window wiper will also operate while the switch is depressed. After the switch is released for approximately three seconds, the window wiper will stop.


NOTICE

If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.


Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.