Firmware Compatibility
UPS 300
Show/hide table
| UPS View | Version | 2.00 | 2.00 | 2.01 | 2.20 | 2.20 | 2.30 | 2.30 | 2.40 | 2.40 | 2.40 |
| Part Number | 68019-1A | 68019-1A | 68019-1B (1) | 68019-1C (1) | 68019-1C | 68019-1D (1) | 68019-1D | 68019-1E (1) | 68019-1E | 68019-1E | |
| APC Firmware | Boot Monitor | 2.01 | 2.01 | 2.01 | 3.00 | 3.00 | 3.00 | 3.00 | 3.10 | 3.10 | 3.10 |
| Internal | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 1.00 | 1.04 | 1.00 | |
| APOS | 2.12 | 2.13 | 2.14 | 2.20 | 2.21 | 2.30 | 2.31 | 2.42 | 2.43 | 1.00 | |
| APC FPGA | 1.00 | 1.01 | 1.02 | 1.03 | 1.03 | 1.04 | 1.04 | 1.06 | 1.08 | 1.08 | |
| DSP | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | |
| Part Number | 68010-1A | 68010-1B (1) | 68010-1C (1) | 68010-1D (1) | 68010-1E | 68010-1F (1) | 68010-1F | 68010-1H (1) | 68010-1J (1) | 68032-1A (1) | |
| PCC | PCC FPGA | 0.99 | 1.00 | 1.01 | 1.02 | 1.02 | 1.04 | 1.04 | 1.06 | 1.08 | N/A |
| Part Number | 68014-1A | 68014-1B (1) | 68014-1C (1) | 68014-1D (1) | 68014-1D | 68014-1E (1) | 68014-1E | 68014-1F (1) | 68014-1G (1) | N/A | |
| ZZC | ZZC FPGA | N/A | N/A | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.01 | 1.02 | 1.02 |
| Part Number | N/A | N/A | 68021-1A (1) | 68021-1A | 68021-1A | 68021-1A | 68021-1A | 68021-1A | 68021-1B (1) | 68021-1B (1) | |
| SNMP MIB | Version | N/A | N/A | N/A | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| Part Number | N/A | N/A | N/A | 68017-1A (1) | 68017-1A | 68017-1A | 68017-1A | 68017-1A | 68017-1A | 68017-1A | |
| |
4724 4897 |
5465 5529 |
5913 5914 5915 |
6515 6516 6519 6545 |
6700 6701 |
7354 7357 7373 |
9199 9375 9425 |
9480 10035 10036 10037 |
9480 10036 10038 |
||
| Comment | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | ||
Show/hide table
| ( 1 ) | Concurrent release |
| ( 2 ) | First production Release |
| ( 3 ) | Added 4 wire support and fast transfer to bypass |
| ( 4 ) | Added SNMP and N+1 support |
| ( 5 ) | The problem with the Fixed Discharge walk-in has been fixed. |
| ( 6 ) | Support Burr Brown A/D, independent phase VR, software only options, problem fixes |
| ( 7 ) | Problem fix release, MMS Walk-in problem fix, ATS cmd 1 second delay, vacumn warning, RPS calibrate Password timeout, N+1Switching |
| ( 8 ) | Single Display support, Modbus 485 support, Load Cell support, Internal 555 flash memory support, new DC Bus support, problem fixes: swap accel. signals,K4 status monitoring, rotor preheat changes, arm. temp monitoring during RPS cal.,Sys. AC voltage calibration |
| ( 9 ) | Updated Preheat Method, Fixed Bypass Range Checking Problem on Autostart after exhaustive discharge, added zigzag datalock error, fixed scrolling bypass errors |
| ( 10 ) | Initial Release of UPS150 code. Based on 2.43 Series 300 Code with 150KVA limits. |
Caterpillar Information System:
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Install
3054 and 3056 Engines 550 Generator Set Control Panel Indicators
3126E and 3126B Commercial and Truck Engines Fuel Inlet Screen - Clean/Inspect/Replace - If Equipped
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Assemble
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Firmware
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Disassemble
3408E and 3412E Industrial Engines Injection Actuation Pressure Sensor
C12 Marine Engine Air Inlet and Exhaust System
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Travel Motor - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
C12 Marine Engine Electronic Control System Components
3408E and 3412E Industrial Engines Maintenance Interval Schedule - 3408E Industrial Engine
3408E and 3412E Industrial Engines Maintenance Interval Schedule - 3412E Industrial Engine
C12 Marine Engine Lubrication System
3056E Industrial Engine Engine Valve Lash - Inspect/Adjust
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Firmware - Update
3054 and 3056 Engines 550 Generator Set Control Panel Keys
3054 and 3056 Engines 550 Generator Set Control Panel Input/Output Expansion
3054 and 3056 Engines 550 Generator Set Control Panel Symbols
3408E and 3412E Industrial Engines Water Temperature Indicator
C12 Marine Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Customer Specified Parameters
3408E and 3412E Industrial Engines Stopping the Engine