2014/02/07 Caterpillar


The 127-2450 Cylinder Head Kit Includes A New Cylinder Head Group {1100}

Usage:

3616 1FN
Engine:
3606 (S/N: 8RB1-UP)
3608 (S/N: 6MC1-UP; 1ZD1-UP; 5PG1-UP; 7WR1-UP)
3612 (S/N: 9RC1-UP; 9FR1-UP)
3616 (S/N: 1PD1-UP; 1FN1-UP)
Engine News SEBD9304, 01 December 2001, "The 127-2450 Cylinder Head Kit Includes A New Cylinder Head Group". The article has been revised to remove effectivity.

The 127-2450 Cylinder Head Kit includes the new 188-7687 Cylinder Head Gp. This cylinder head group is designed for marine applications. The 188-7687 Cylinder Head Gp has inlet valves with a 20 degree valve seat angle and exhaust valves with a 30 degree valve seat angle. The 127-2450 Cylinder Head Kit is packaged according to the requirements of the marine certification society.

Caterpillar Information System:

3054 and 3056 Marine Generator Set Engines Water Pump - Install - 3054 Engine
3054 and 3056 Industrial and Generator Set Engines Water Pump - Inspect
Electronic Modular Control Panel II (EMCP II) Pulse Width Modulated Sensor
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Swivel - Assemble
3054 and 3056 Marine Generator Set Engines Water Pump - Remove - 3054 Engine
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Swivel - Disassemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Swivel - Install
3054 and 3056 Marine Generator Set Engines Engine Oil Cooler - Remove and Install - 3054 Engine
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Swivel - Remove
Electronic Modular Control Panel II (EMCP II) Charging System
Electronic Modular Control Panel II (EMCP II) SP Fault Code
3054 and 3056 Marine Generator Set Engines Engine Oil Filter Base - Install - 3056 Engine
Electronic Modular Control Panel II (EMCP II) Indicator for Emergency Stop (for EUI Engines)
3054 and 3056 Marine Generator Set Engines Heat Exchanger - Remove - 3056 Engine
3054 and 3056 Marine Generator Set Engines Heat Exchanger - Install - 3056 Engine
Electronic Modular Control Panel II (EMCP II) Indicator for Emergency Stop (for MUI Engines)
3054 and 3056 Marine Generator Set Engines Heat Exchanger - Remove - 3054 Engine
2002/06/01 A New Valve Adjusting Screw Is Available {1123}
Electronic Modular Control Panel II (EMCP II) Indicator for High Water Temperature
Electronic Modular Control Panel II (EMCP II) Indicator for Low Oil Pressure
EMCPII+ for Gas Engines Indicator for Overcrank
Electronic Modular Control Panel II (EMCP II) Typical Generator Abbreviations
3054 and 3056 Industrial and Generator Set Engines Automatic Timing Advance Unit - Test
Power Module Switchgear (Low Voltage and Medium Voltage) Alarm Modules
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.