 | |
| Illustration 1 | g00853802 |
"MAIN" Screen (1) Indicator for the state of the system (2) Indicator for the mode of the system (3) Indicator for the position of the engine control switch (ECS) (4) Button for the "MAIN" screen (5) Button for the "ALARMS" screen (6) Button for the "ANNUNCIATE" screen (7) Button for the "METERING" screen (8) Button for the "SETUP" screen | |
The display is a touchscreen. The display of the screens is controlled by the touchscreen display buttons for navigation. The buttons for navigation include the following buttons:
- "MAIN"
- "SETUP"
- "ANNUNCIATE"
- "ALARMS"
- "METERING"
 | |
| Illustration 2 | g00853804 |
Block Diagram for Screen Navigation (9) "MAIN" screen (10) Screen for alarm (11) Screen for annunciation (12) Screen for metering (13) Screen for setup (14) Screen for "alarm history" (15) Screen for password (16) Screen for load control (17) Screen for setup (logged in) (18) Screen for help (19) Screen for tools (20) Screen for cooldown configuration | |
The touchscreen display allows access to the system parameters. The parameters can be monitored and configured.
The buttons for navigation of the screens are available on most screens. Touching each of the buttons for navigation will display one of the five main screens. The button for the selected screen will become yellow. If an alarm is active the button for "ALARMS" (5) will be red. Illustration 2 shows a map of the screens. Help screens are available.