2001/11/12 Caterpillar


Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}

Usage:

554 1AM
Machine Engines:
3054 (S/N: 5HK1-UP; 9RM1-UP; 7BJ1-UP)
3054B (S/N: 7SG1-UP)
Machine Engines:
3056 (S/N: 8XJ1-UP)
Disassembly and Assembly, SENR6241, "3054 Engine for Caterpillar Built Machines ", "Inlet and Exhaust Valve Guides - Remove and Install"Disassembly and Assembly, SENR5011, "3054B Engine for Caterpillar Built Machines", "Inlet and Exhaust Valve Guides - Remove and Install"Disassembly and Assembly, SENR5026, "3056 Engine for Caterpillar Built Machines", "Inlet and Exhaust Valve Guides - Remove and Install"

The valve seat cutter has been added to the Disassembly and Assembly, "Inlet and Exaust Valve Guides - Remove and Install". Add the following information:

Note: After installing the unfinished valve guides and valve seat inserts, you must ream the valve guides and valve seat inserts to the finished diameter. The valve guides and valve seat inserts are cut and reamed in one operation. This operation is performed by using the 157-3720 Valve Seat Cutter. Refer to the Specifications, "Cylinder Head Valves" for the finished diameter of the valve guides and valve seat inserts.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.