New Protective Caps For Hose Clamps Are Now Available {5057}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g00831484 |
New protective caps for hose clamps are now available. The new caps provide protection from the sharp edges and corners of the hose clamps. The new caps are for use on the constant torque hose clamps. Refer to the following Table for the correct part numbers:
Show/hide table
| Part Number | Width of Clamp |
| 211-8071 | 8 mm (5/16 inch) |
| 148-2786 | 12.7 mm (1/2 inch) |
| 211-8073 | 16 mm (5/8 inch) |
The new protective caps slide onto the exposed end of the hose clamp. Refer to Illustration 1.
Caterpillar Information System:
2001/10/01 Service Manuals Are Available For 723Plus Digital Speed Controls {1265, 1276}
SR4 Generator with VR3 or VR4 Voltage Regulator Rotating Rectifier - Test
Automatic Transfer Switches CTG, CTGD Series Transfer Switch Operation
Automatic Transfer Switches CTG, CTGD Series Input Option Connections of the Controller
SR4 Generator with VR3 or VR4 Voltage Regulator Troubleshooting
SR4 Generator with VR3 or VR4 Voltage Regulator Service Tools
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
Machine Security System Software - Uninstall - "Immobilizer" Feature
SR4 Generator with VR3 or VR4 Voltage Regulator Lead Connections
G3406 and G3412 Generator Set Engines Ignition System
G3406 and G3412 Generator Set Engines Camshaft
G3406 and G3412 Generator Set Engines Crankshaft
Power Module Switchgear (Low Voltage and Medium Voltage) Abbreviations
3408E and 3412E Industrial Engines Coolant Level Sensor Circuit - Test
2001/11/01 A New Rear Housing Assembly is Available {1157}
3054 and 3056 Marine Generator Set Engines Fuel Injection Pump
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles
Automatic Transfer Switches CTG, CTGD Series Timers
2001/10/01 Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01 Commercial Folded Core Radiators Can Be Converted to Multiple Row Module Radiators {1353}
Machine Security System Time - Set
3024C Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
Machine Security System Product Identification Number - Program
3024C Engine for Caterpillar Built Machines Rocker Shaft - Disassemble