2001/10/29 Caterpillar


Correction to Disassembly and Assembly , "Bucket-Install" {0645, 6101, 6102}

Usage:

988G 2TW
Wheel Loaders:
988G (S/N: 2TW1-UP)
Disassembly and Assembly, RENR2173, "988G Wheel Loader Machine Systems", "Bucket-Install". This module is part of Service Manual, RENR3086.

The part number of the grease that is listed in steps 3, 5, 8, 12, and 15 of the installation procedures is incorrect. The correct part number is 5P-0960 Molybdenum Grease .

The following note should be added after step 4 in the break-in procedure.

Note: The pin joints should be lubricated again between the exercise cycles for the empty bucket, the half loaded bucket, and the fully loaded bucket.

Caterpillar Information System:

D10R Track-Type Tractor Power Train Chrome Bearing - Remove and Install
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Disassemble
631G Wheel Tractor Power Train Transmission and Transfer Gears - Connect
D6N Track-Type Tractor Power Train Priority Valve
D3G, D4G and D5G Track-Type Tractors Parking Brake
631G Wheel Tractor Power Train Transmission and Transfer Gears - Separate
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2001/10/15 Correction to Specification , "Track Rollers" {4180}
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Disassemble
966H and 972H Wheel Loaders Machine Systems Electrohydraulic Control - Remove
621G and 623G Wheel Tractor Power Train Final Drive - Disassemble
3056 Engines Engine Oil Pump
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Water Pump - Remove
3056E Industrial Engine Camshaft
2001/11/12 A New Rear Housing Assembly is Available {1157}
3056 Engines Connecting Rod
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Water Pump - Install
3056 Engines Cylinder Head
D6R Series II Track-Type Tractor Power Train Bevel and Transfer Gears - Disassemble
621G and 623G Wheel Tractor Power Train Final Drive - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.