Fuel Tank
Show/hide table
 | |
| Illustration 1 | g00828934 |
(1) Torque for two bolts ... 9.0 ± 0.9 N·m (7 ± 1 lb ft)
(2) Torque for five screws ... 1.4 ± 0.1 N·m (1.03 ± 0.074 lb ft)
(3) Apply 1U-8846 Gasket Sealant to the flange surface.
(4) Apply 5P-3413 Pipe Sealant to the thread of one valve assembly.
(5) Apply 5P-3413 Pipe Sealant to the thread of one hose end.
Fuel Tank Mounting
Show/hide table
 | |
| Illustration 2 | g01011168 |
(6) Apply 4C-4032 Bearing Mount Compound to the threads of the bolts and tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
Caterpillar Information System:
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Boom Cylinder - Remove and Install
5130B Excavator Bearing (Swing Drive) - Lubricate
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader Diagnostic Codes
3456 Engine for Caterpillar Built Machines CAT Data Link Circuit - Test
312C Excavator Machine Systems Swing Drive - Disassemble - Older Style
3456 Engine for Caterpillar Built Machines Diagnostic Codes
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Operation
305 CR Mini Hydraulic Excavator Work Tool Control - If Equipped
SR17, SR18, SR21, SR318 and SR321 Snowblowers Work Tool Installation
H115/H115S, H120/H120CS, H130/H130S, H140/H140S, H160/H160S, H180/H180S, and H195 Hydraulic Hammers Mounting Bracket Bolts - Tighten
325C Excavator Machine System Specifications Travel Motor Lines
325C Excavator Machine System Specifications Travel Motor Lines
G3500B Engines Compression
305 CR Mini Hydraulic Excavator Cooling System Pressure Cap - Clean/Replace
SR17, SR18, SR21, SR318 and SR321 Snowblowers Operation
325C Excavator Machine System Specifications Upper Frame
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Reference Material
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Transport Position
SR17, SR18, SR21, SR318 and SR321 Snowblowers Chain - Lubricate
SR17, SR18, SR21, SR318 and SR321 Snowblowers Discharge Chute Chain - Adjust/Replace
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Lifting and Tying Down
SR17, SR18, SR21, SR318 and SR321 Snowblowers Cutting Edge - Replace
320C U Excavator Lifting Capacities
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test