A New Piston and Piston Rings Are Now Available {1214, 1215}
- Engine:
- 3406E (S/N: 6BR1998-UP; 9NN442-UP; 1MZ406-UP)
- C-15 (S/N: BEM143-UP)
Description of Change: A new piston and piston rings is now available for the 3406E engine. The former piston and piston rings have been replaced by an improved design that has a new oil cooling gallery and new piston rings.
Adaptable To: The new piston and piston rings are effective with the engines that are listed above and adaptable to S/N:6BR1-UP
, S/N:; 9NN1-UP
, S/N:; 1MZ1-UP
, and C-15 S/N:BEM1-UP
. The new piston and piston rings replace the former piston and piston rings. When it is necessary to replace a former piston, all of the pistons must be replaced with the new piston and piston rings due to a change in the mass of the piston. The following table contains the group part numbers for the piston and piston rings.
Show/hide table
Former Group Number     | New Group Number     |
136-1562 Piston and Rod Gp     | 176-5745 Piston and Rod Gp     |
Show/hide table
Parts that have been changed     | |
Former     | New     |
136-1560 Piston Crown     | 176-5744 Piston Crown     |
130-0241 Piston Skirt     | 132-6663 Piston Skirt     |
134-3761 Piston Ring     | 177-7496 Piston Ring     |
2P-2817 Piston Ring     | 176-5749 Piston Ring     |
7N-7078 Piston Ring     | 189-9771 Piston Ring     |
Caterpillar Information System:
HDB Series and M1 Series Heavy Duty Brushless Alternators Residual Magnetism - Restore
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Assemble
2001/08/01 Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
2001/08/01 Oil Pan No Longer Requires Gasket Sealant {1302}
HDB Series and M1 Series Heavy Duty Brushless Alternators Rectifier - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Disassemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Stator - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators Capacitor - Test
G3600 Engines Aftercooler
HDB Series and M1 Series Heavy Duty Brushless Alternators Field Winding - Test
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Angle)
3126B Marine Engines ECM Will Not Communicate with Other Systems or Display Modules
3064 and 3066 Engines for Caterpillar Built Machines Engine Speed - Check
2001/08/01 When These Control Groups Are Used As Service Replacements, Use This Procedure For The Initial Setup Of The 203-7810 Engine Monitoring Control Group And The 203-7811 Engine Monitoring Control Group {1901, 7490}
2001/10/01 The Oil Pan No Longer Requires Gasket Sealant {1302}
3512 Industrial Engine Engine Oil Pan
G3600 Engines Engine Oil Temperature Regulator
G3600 Engines Ignition System
3408E and 3412E Industrial Engines Throttle Position Sensor - Calibrate
3126B Marine Engines Diagnostic Codes
3512B Marine Auxiliary Engine Vibration Sensor
SBF214 and SUF557 Skid Mounted Power Packs Maintenance Interval Schedule