3034 Marine Engine - Installation Guide Caterpillar


Power Take-Off

Usage:

3034 CPP





Illustration 1g00811872

Typical single groove pulley for the PTO




Illustration 2g00811873

Typical multiple groove pulley for the PTO

The belt driven PTO can run items such as bildge pumps, refrigerator pumps, or a second alternator.

Loads up to 8 kW (11 hp) can be driven by the belt drive. The side force can not be more than 113 mm (4.45 inch) from the front face of the cylinder block. The maximum power should not exceed 2 kW (2.7 hp) per belt.

Illustration 1 shows a single groove pulley with an outside diameter of 143 mm (5.6 inch).

Illustration 2 shows a multiple groove pulley with the following diameters: Two pulleys with a 195 mm (7.7 inch) outside diameter, One pulley with a 152 mm (6.0 inch) outside diameter and One pulley with a 106 mm (4.2 inch) outside diameter

Caterpillar Information System:

914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
2001/08/06 New Inlet Valve for Cylinder Head Groups in Machine Engines {1105}
3034 Marine Engine - Installation Guide Engine Control
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems with Single Input or Dual Input with Maintenance Bypass
2001/08/01 New Inlet Valves for Cylinder Head Groups in Industrial Engines {1105}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems that are equipped with Isolation Switches that are located in the System Cabinet
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Single Module System (SMS)
3126B Marine Engines System Configuration Parameters
3126B Marine Engines Factory Passwords Worksheet
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Compression - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
G3500B Engines Exhaust Manifold
3064 and 3066 Engines for Caterpillar Built Machines Electric Starting System - Test
120H and 135H Motor Graders Hydraulic System Oil Filter - Replace
3126E Truck Engines Safety Messages
3126E Truck Engines Model View Illustrations
3126E Truck Engines Engine Description
3456 Generator Sets Generator Identification
3126E Truck Engines Sensors and Electrical Components
3456 Generator Sets Sensors and Electrical Components
3126E Truck Engines Diagnostic Flash Code Retrieval
Cross Reference of European Electrical Symbols{7566} Cross Reference of European Electrical Symbols{7566}
3456 Generator Sets Air Shutoff
3456 Generator Sets Manual Stop Procedure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.