Engine Control
Show/hide table
 | |
| Illustration 1 | g00811739 |
(1) Plunger (2) Engine stop solenoid (3) Anchor point for the throttle cable (4) Selection lever for the engine speed (RPM) | |
The selection lever for the engine speed (RPM) (4) is shown in the idle position. A Morse 33C cable is recommended for the throttle. The anchor point (3) mounts the throttle cable.
The engine stop solenoid (2) is energized to stop. The engine is stopped by a button on the control panel. The engine can be stopped manually by pushing the plunger (1) until the engine stops. Illustration 1 shows the plunger in the RUN position.
Caterpillar Information System:
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems with Single Input or Dual Input with Maintenance Bypass
2001/08/01 New Inlet Valves for Cylinder Head Groups in Industrial Engines {1105}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems that are equipped with Isolation Switches that are located in the System Cabinet
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Single Module System (SMS)
3126B Marine Engines System Configuration Parameters
3126B Marine Engines Factory Passwords Worksheet
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Compression - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
G3500B Engines Exhaust Manifold
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
Starting Motor Solenoid - Replace {1467} Starting Motor Solenoid - Replace {1467}
120H and 135H Motor Graders Centershift Lock Bar - Clean/Lubricate
2001/08/06 New Inlet Valve for Cylinder Head Groups in Machine Engines {1105}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3034 Marine Engine - Installation Guide Power Take-Off
3064 and 3066 Engines for Caterpillar Built Machines Electric Starting System - Test
120H and 135H Motor Graders Hydraulic System Oil Filter - Replace
3126E Truck Engines Safety Messages
3126E Truck Engines Model View Illustrations
3126E Truck Engines Engine Description
3456 Generator Sets Generator Identification
3126E Truck Engines Sensors and Electrical Components
3456 Generator Sets Sensors and Electrical Components
3126E Truck Engines Diagnostic Flash Code Retrieval