G3500 Engines Caterpillar


Exhaust Bypass Valve

Usage:

G3508 2TJ
对排气旁通阀进行调整,以控制满负荷运转时流到涡轮增压器涡轮机的排气。 满负荷运转时推荐的节气门角度大约为70度。 使用下述程序来调整排气旁通阀:



    图 1g00814530

    排气旁通阀的侧视图

    (1) 螺塞

    (2) 锁母

    (3) 调整螺钉

  1. 拆下螺塞 (1) 和密封。

  1. 松开锁母 (2) 。 顺时针转到调整螺母 (3) 大约4圈,以便解除排气旁通阀的功能。 小心不要将该螺钉拧紧得太远。

  1. 按照专门说明书, SEHS9769, "G3500发动机安装和初次启动程序"来调整发动机。

  1. 转动调整螺钉 (3) 来调整排气旁通量,以使满负荷运转时的节气门角度大约为70度。

  1. 当运转情况负荷要求时,拧紧螺母 (2) 至扭矩为14 ± 3 N·m (10 ± 2 lb ft)。

  1. 安装密封和螺塞 (1) 。

Caterpillar Information System:

Chart for Heli-Coil Repair {0676} Chart for Heli-Coil Repair {0676}
3034 Marine Engine Exhaust Elbow - Remove and Install
2001/07/16 New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
3126B Marine Engines Engine Wiring Information
3064 and 3066 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
CONVERSION CHART{0374} CONVERSION CHART{0374}
3034 Marine Engine Coolant Temperature Sensor - Remove and Install
3126B Marine Engines Electrical Connectors and Functions
3034 Marine Engine V-Belts - Remove and Install
3034 Marine Engine Engine Oil Pan - Remove and Install
3034 Marine Engine Inlet Manifold - Install
G3500 Engines Cooling System
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System General Information
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Service Tools
2001/07/01 New Inlet Valves for Cylinder Head Groups in Truck Engines {1105}
120H and 135H Motor Graders Centershift Lock Bar - Clean/Lubricate
Starting Motor Solenoid - Replace {1467} Starting Motor Solenoid - Replace {1467}
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
G3500B Engines Exhaust Manifold
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Compression - Test
3126B Marine Engines Factory Passwords Worksheet
3126B Marine Engines System Configuration Parameters
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Single Module System (SMS)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.