MID 047 - CID 0190 - FMI 07 Primary Speed Sensor misinstalled
Conditions Which Generate This Code:
The Primary Engine Speed/Timing Sensor is connected to the connector for the Secondary Engine Speed/Timing Sensor.
System Response:
The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the Caterpillar Electronic Technician (ET).
Test Step 1. Perform the following test: Engine Speed/Timing Sensor
Results:
- OK - Stop.
- REPAIRED, OK - Stop.
Caterpillar Information System:
3034 Marine Engine - Installation Guide Fuel System
3126B Marine Engines Glossary
G3600 Engines Engine Design
3512B Marine Auxiliary Engine MID 047 - CID 0342 - FMI 07 Secondary Speed Sensor misinstalled
G3304 and G3306 Engines Basic Engine
3512B Marine Auxiliary Engine MID 047 - CID 0248 - FMI 09 CAT Data Link not communicating
37-MT, 41-MT, and 42-MT Series Starting Motors Pinion Clearance - Adjust
Product Link 151/201 Wiring Harness (Open Circuit) - Test
3034 Marine Engine Exhaust Manifold - Remove and Install
3126B Marine Engines System Overview
3034 Marine Engine Heat Exchanger - Install
3512B Marine Auxiliary Engine Analog Sensor - Calibrate
3034 Marine Engine Inlet Manifold - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Centrifugal Oil Filter - Inspect
3034 Marine Engine Engine Oil Cooler - Remove
3034 Marine Engine Engine Oil Cooler - Install
3034 Marine Engine Marine Transmission Oil Cooler Core - Remove and Install
G3304 and G3306 Engines Restriction of Air Inlet and Exhaust
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor - Assemble - 37-MT and 41-MT
G3304 and G3306 Engines Measuring Inlet Manifold Temperature
3034 Marine Engine Auxiliary Water Pump - Remove
3034 Marine Engine Auxiliary Water Pump - Install
3034 Marine Engine Auxiliary Water Pump - Disassemble
G3304 and G3306 Engines Measuring Inlet Manifold Pressure