Look up FLS and FTS Values for Rerates. {7620}
- Truck Engines:
- Electronically Controlled
Features/Benefits
Caterpillar's Service Information System (SIS) may be used to look up Full Load Setting (FLS) and Full Torque Setting (FTS) for rerates from SIS CD's and SIS DVD's.
After obtaining a new "Test Spec Number" from the Electronic Technician (ET), use the following procedure to look up FLS and FTS .
- Insert the Engine Performance Specifications CD or DVD into the CD drive or DVD drive of your computer.
- Select "Engine Performance Specs" from the SIS main menu on your computer.
- Input the new "Test Spec Number" for the rerate. (DO NOT enter an Engine Serial Number.)
- Click the "Specification" button.
- Select the range in the "Effective Serial" number for your specific engine.
- Click the "View" button.
- FLS and FTS values are displayed for the new "Test Spec Number".
Reference
Guidelines for FLS and FTS changes for HD and MD truck engines.Reference
When you rerate outside of the current rating family, FLS and FTS should be changed to the values that are listed on the CD or the DVD. This requires a "Reason Code 5" factory password. Rerating a C-12 engine from 355 hp to 430 hp is one example.Reference
For MD truck engines, FLS and FTS should also be changed when the engine is rerated within the current rating family. Rerating within the current rating family requires a "Reason Code 5" factory password. Rerating a 3126B engine from 250 hp and 660 lb ft of torque to 250 hp and 800 lb ft of torque is one example.Reference
For HD truck engines, FLS and FTS should not be changed when the engine is rerated within the current rating family. Rerating within the current rating family does not require a "Reason Code 5" factory password. Rerating a 3406E engine from 475 hp and 1650 lb ft of torque to 475 hp and 1750 lb ft of torque is one example.Reference
For HD truck engines, FLS and FTS should be changed to 0/0 when the engine is rerated to a "field rerate only" rating. Rerating a 3406E engine from 375 hp to 410 hp "field rerate only" rating is one example.Caterpillar Information System:
C18 Generator set and C18 Marine Engines Cylinder Head - Remove
3406E Marine Engine Housing (Front) - Install
2001/08/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and Turbocharger Oil Drain Line {1307}
3406E and C15 Marine Engines Housing (Front) - Remove
3500B and 3500B High Displacement Generator Set Engines Digital Sensor Supply
3500B and 3500B High Displacement Generator Set Engines Analog Sensor Supply
385B Excavator Equipment Lowering with Engine Stopped
G3406 Engines Connecting Rod and Main Bearing Journals
3003, 3013, 3014 and 3024 Industrial Engines Cooling System Coolant (DEAC) - Change
3003, 3013, 3014 and 3024 Industrial Engines Cooling System Coolant (ELC) - Change
3500B and 3500 Marine Propulsion Engines with EUI Option Specifications
3406C Marine Auxiliary Generator Set Reference Numbers
G3500 Engines Ignition System
C18 Generator set and C18 Marine Engines Cylinder Head - Install
G3406 Engines Flywheel Housing
2001/07/01 New Spacers and Gaskets Are Being Used On The Turbocharger Oil Supply Line and The Turbocharger Oil Drain Line {1052}
2001/07/01 Default Settings Have Been Changed On Generator Set Ground Fault Monitors {1404}
G3406 Engines Accessory Drive
G3600 Engines Electronic Control (Combustion Sensor)
2001/09/01 A New Accumulator Is Used In The Hydrax System {1716}
3456 Generator Sets Parallel Operation
3456 Generator Sets Voltage Regulators
3500B and 3500B High Displacement Generator Set Engines Engine Sensor Open/Short Test
3500B and 3500B High Displacement Generator Set Engines Engine Speed/Timing Sensor