Engine Oil Filter Base - Install - 3056 Engine
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine oil filter base (1) on the engine block. Install four bolts (3) that secure the engine oil filter base to the engine block.
Show/hide table
Illustration 1 | g00632553 |
- Install oil line (2) to the oil filter base.
- Install oil filters (4). Tighten the oil filter by hand. Refer to the instructions that are in the Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct installation procedure. Do not overtighten the oil filter.
Show/hide table
Illustration 2 | g00632425 |
Caterpillar Information System:
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3056 Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3054 and 3054B Engines
G3500 Engines Exhaust Manifold - Dry
3512B Marine Auxiliary Engine Engine Oil Pan
G3600 Engines Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
3500 Spark Ignited Engines Exhaust Manifold - Water cooled
Generator Set Control Panel for Switchgear Conversion Related Components
2002/02/01 The Driver's Edition of Pocket Tec TM is Now Available {1900, 7620}
3176C and 3196 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3412C Engine Engine Oil Cooler - Install
Electronic Modular Control Panel II (EMCP II) GSC CID 0566 - FMI 07 (for MUI Engines)
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Remove - Delphi
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Install - Delphi
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel
3500B and 3500B High Displacement Generator Set Engines Engine Control Switch (ECS) (EMCP II)
3034 Marine Engine - Installation Guide Engine Mounting
3054 and 3056 Industrial and Generator Set Engines Fuel System - Prime
G3600 Engines Engine Speed/Timing Sensor - Clean/Inspect
120H and 135H Motor Graders Alternate Exit
G3520C and G3520E Engines Water Temperature Regulator
3512B Marine Auxiliary Engine System Overview
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test
3054, 3054B and 3056 Marine Engines Heat Exchanger - Remove - 3054 and 3054B Engines